VIPCOO H3 Electric Dirt Bike

VIPCOO H3 Electric Dirt Bike

The VIPCOO H3 is a high-performance electric dirt bike created for experienced riders who want strong acceleration, long-range battery capacity and composed control on suitable private land and off-road tracks. Its compact motorcycle-inspired chassis combines a 3500W mid-mounted motor with a removable 48V 23Ah lithium battery, hydraulic suspension and hydraulic braking. The result is a substantial, trail-focused electric machine designed for dirt, gravel, grass and other permitted off-road environments.

The H3 is not a conventional road-going bicycle. Its power and supplier-stated maximum speed place it outside ordinary electrically assisted bicycle limits in many countries and states. Owners must check the laws that apply to the intended riding location, obtain any required permissions and use the product only where it is legal. Protective equipment, responsible supervision and riding within personal ability are essential.

3500W mid-mounted motor

A 3500W mid-mounted electric motor provides the drive for demanding off-road riding. Locating the motor centrally helps keep mass closer to the middle of the chassis, contributing to a more balanced feel over uneven surfaces. The supplier states a maximum speed of up to 39 mph under suitable conditions. Actual performance varies with rider weight, battery charge, gradient, terrain, tyre pressure, weather and riding style.

Strong performance demands careful throttle control and adequate braking distance. The H3 is intended for competent riders who understand the additional weight and acceleration of a high-output electric dirt bike. New riders should begin at low speed in a clear, controlled area and become familiar with the controls before attempting more challenging terrain.

48V 23Ah removable battery

The rechargeable 48V 23Ah lithium battery is removable for convenient charging and storage. A key-controlled system helps secure the battery and prevents the machine from being started without the key. The supplier quotes a riding range of approximately 25–43 miles per charge. Range is an estimate rather than a guarantee and can be reduced by cold temperatures, soft ground, steep climbs, frequent acceleration, higher speeds and heavier loads.

Charging takes approximately 7–9 hours with the supplied 54.6V 3A charger. Charge in a dry, ventilated location using the correct charger, follow the supplied battery instructions and allow the battery and charger to cool before handling or storage. Long-term battery condition depends on correct charging, temperature and storage practices.

Hydraulic suspension and braking

The H3 uses a front hydraulic suspension fork with rear nitrogen-filled shock absorbers. This setup is designed to absorb bumps and maintain contact over broken ground, helping the rider retain control on dirt tracks and rough trails. Suspension cannot remove every impact, so riders should slow for obstacles and inspect the machine after demanding use.

Front and rear hydraulic brakes provide the stopping system. Hydraulic operation supports progressive lever feel and strong braking response appropriate to the machine's performance and weight. Braking distance changes with speed, surface grip, weather, tyre condition and load. Brake operation, pad wear and fluid condition should be checked regularly and before every ride.

Off-road wheels, frame and rider capacity

A 14-inch front wheel and 12-inch rear wheel use pneumatic off-road tyres with a tread intended to find grip on loose and uneven surfaces. The differing wheel sizes support a compact dirt-bike layout. The frame combines iron and aluminium alloy components, and the supplier specifies a maximum rider load of 265 lb. Never exceed the rated load or carry a passenger unless the manufacturer expressly permits it.

The bike's approximate net weight is 126 lb, with a packaged weight of about 143 lb. Its shipping carton is approximately 56.1 × 13 × 29.1 inches. Because of the weight, two-person handling is recommended when moving the carton or completing initial assembly.

Display, lighting and everyday controls

A high-definition digital instrument display shows essential riding information such as speed, selected mode and remaining battery status. Lighting equipment includes a high-intensity LED headlight, integrated brake and tail lights, turn signals and hazard lights. These features improve visibility, but they do not make the H3 legal for public-road use where registration, equipment or vehicle classification rules are not satisfied.

The H3 is supplied in Matte Black and Green. Colour and warehouse availability vary by destination. Choose only a variant that is shown as available for the delivery country. Punk Ride will manage the customer-facing order, warranty process and after-sales support for purchases placed through Punk Ride.

What's in the box

Key specifications

Important use and care information

Assembly, adjustment and maintenance should be completed by a competent person. Before each ride, check the brakes, tyres, wheel security, steering, suspension, frame fasteners, battery mounting and controls. Wear a properly fitted helmet and suitable protective clothing. Keep hands, clothing and objects away from moving parts, and do not ride through deep water or use the bike in conditions beyond its design.

Specifications are based on current supplier information and may be updated by the manufacturer. Images show the current supplier presentation; minor production details can change without notice. Range, speed and charge-time figures are estimates obtained under particular conditions and are not guaranteed for every rider or route.

28 reviews · 4.5 out of 5 stars