Browse electric bikes, electric scooters and accessories currently listed in the Punk Ride catalogue. This broad collection is useful for discovering model styles you might not have considered, from compact scooters to larger bikes and practical riding equipment. Use the category links and product filters to narrow the selection.
Open individual listings for the exact specifications, included items and options. The product photographs represent the listed model, helping you compare designs without relying on generic illustrations. If you already know your preferred brand or vehicle type, the more focused collections may help you reach it faster.
Bicycle Combination Cable Lock — 1.2 m, 1.5 m or 1.8 m
Choose your reach. Set your code.
Carry a black coiled steel-wire bicycle cable lock with a five-dial combination mechanism. Choose a listed length of 1.2 m, 1.5 m or 1.8 m to suit the route around your bicycle and intended fixed anchor.
Three lengths, one selected lock
The 1.2 m, 1.5 m and 1.8 m options are separate choices. Measure the full locking route and allow room to insert the locking end without pulling the cable tight against the bicycle. The listed cable length is not a guarantee that it reaches around every frame-and-anchor arrangement.
Five dials instead of a key
The product photos show five numbered dials, and the supplier describes a personalised combination. Follow the supplied code-setting instructions, record the code securely and test the lock while open before using it on your bicycle.
Coiled cable for carrying
The steel-wire cable coils for storage. Check that it is secured clear of the wheels and moving parts while riding. A mounting bracket appears in one supplier image, but its inclusion and exact fitting range are not established for every length option.
Match security to the situation
The supplier’s anti-cut wording is not an independent security rating or a theft-prevention guarantee. Choose a sound fixed anchor and suitable supplementary security for the location and bicycle. No tested cable diameter or certified attack resistance is supplied for this listing.
A black bicycle saddle with an attached backrest and a textured diamond-pattern surface. The supplier lists this seat for electric bikes and mountain bikes.
Colour: black.
Design: saddle with backrest.
Approximate saddle length and width: 25 cm, as stated by the supplier; allow for manual measurement variation.
Fit
Compare the underside mounting assembly shown in the photos with your bicycle before ordering. Check mounting compatibility and clearance; a model-specific fit is not established.
Questions
Is the backrest included? Yes, this option is the black saddle with backrest shown in the product photos.
Will it fit every electric bike? Check the mounting arrangement on your bike against the underside photo before ordering.
Nylon Tyre Traction Straps — Colour and Pack Options
Nylon tyre traction straps in black, green and red. Choose the single-colour or mixed-colour pack shown in the selector; the option states the quantity of each colour.
Product details
The photographs show colour and fitting references rather than every pack count. Check tyre fit and clearance around the wheel, brakes and mudguards before use; universal compatibility is not claimed.
Bicycle Handlebar Camera Mount — Six Fitting Options
Fittings for a bicycle action-camera mount. Choose Metal O type, Metal Q type, or a small or large lock catch with or without an E clip.
Product details
The selected option identifies the fitting supplied; all six are not supplied together. Match its photographed mounting interface to your handlebar and camera or adapter. Camera and bicycle are not included.
Rotating Bicycle Handlebar Camera Clamp — Three Colours
Product details
An aluminium-alloy bicycle handlebar camera clamp with a rotating upper mount. Choose blue, black or red to suit your setup.
Material: aluminium alloy, as stated by the supplier.
Colours: blue, black and red.
Design: two-bolt handlebar clamp with a rotating camera attachment.
Fit and setup
Compare the clamp and camera attachment shown in the selected colour photo with your handlebar and camera setup before ordering. Tighten the mounting hardware and check clearance before riding. Camera and bicycle are not included.
Questions
What is included? The selected colour of camera clamp, with the mounting screw and hex key shown in its photo.
Is this a bicycle parking stand? This is a handlebar camera mounting accessory, as shown in the photos.
LeBycle Bicycle PET Rim Tape — 10 m Roll, Width Options
LeBycle PET bicycle rim tape in a 10 m roll. Choose a width of 21, 23, 25, 27, 29, 32 or 35 mm.
Product details
Match the selected width to your rim manufacturer's requirements and follow the fitting instructions for your wheel and tyre system. The selected option is one roll; wheels, tyres and valves are not included.
Adjustable Bicycle Stem — Black, 90 or 110 mm Options
Black adjustable-angle aluminium bicycle stem in 90 mm or 110 mm options. The supplier specifies a 31.8 mm handlebar clamp and 28.6 mm steerer fitting.
Product details
Check both fitting diameters, available steerer height and cable clearance before ordering. The fitting diagram shows the 90 mm version.
A VEISON alloy disc lock with an alarm, offered in Silver or Black.
Product details
The supplier lists a 6 mm locking pin and a 55 mm effective slot. Check your brake-disc opening, disc thickness and clearance before ordering. This lock requires a compatible disc brake.
Remove the lock before moving your bicycle or scooter. Photos show fitting examples; the brake disc is not included. A reminder cable is pictured, but its inclusion is not confirmed.
One LeBycle bicycle pedal washer, listed by the supplier as aluminium.
Product details
Quantity: one washer. The supplier reference photo shows multiple washers and part of a pedal for illustration. A complete pedal is not included.
Check the required inner diameter, outer diameter and thickness against your pedal and crank before ordering. These fitting measurements are not stated by the supplier.
A bicycle maintenance torque wrench with a window scale and black handle. The supplier lists a torque range of 2–14 Nm, tool-steel construction and chrome plating.
Product details
Follow the component manufacturer's torque specification and the wrench instructions. Check the drive size and required socket or bit before ordering; included bits and calibration certification are not confirmed.
WEST BIKING CO₂ Bicycle Inflator Head — Blue or Red
A WEST BIKING button-operated CO₂ bicycle inflator head, with blue or red accents on a black body. The supplier describes aluminium-alloy construction and a foam grip.
The gas cylinder is not included. The selected supplier photo shows the inflator head and a separate foam sleeve.
Fit and use
The supplier specifies threaded CO₂ cylinders. Confirm the cartridge thread and tyre-valve interface before ordering; a cartridge capacity, thread pitch and maximum operating pressure are not specified in this listing.
Follow the cartridge and tyre manufacturer’s inflation instructions. This accessory uses a separate CO₂ cartridge and is not an electric or hand-operated air pump.
Choose your colour
Blue and Red refer to the coloured controls and accents shown in each option photo. Both options have a black body.
Half-finger cycling gloves with grey palms and black, blue, yellow or red accents. Choose a supplier size label from S to XXL.
Product details
The supplier describes microfiber construction with breathable fabric. Check your intended fit and comfortable operation of the bicycle controls; the photographs illustrate the shared colour design across sizes.
A flexible protection strip for the chainstay of a compatible bicycle, secured with cable ties. Choose Black, Blue, Green, Red, White or Yellow.
Protection for the chainstay
The supplier describes the protector as soft rubber. Its photographs show one curved strip and two fastening ties for each colour. Check the shape of your frame and leave adequate clearance for the chain, crank, wheel and cables.
Check the fit before ordering
Compare the strip shape and fastening positions with your bicycle. The supplier's size label and length diagram differ slightly; this is an approximate-size accessory, with no bicycle-model fit guarantee.
Product specifications
Product
Bicycle chainstay protection strip
Supplier-listed material
Soft rubber
Colours
Black, Blue, Green, Red, White or Yellow
Fitting
Cable-tie attachment; check frame shape and clearance
Supplier size label
222 × 20 × 0.3 mm
Length shown in supplier diagram
225 mm; dimensions have not been independently measured
Quantity
One protector in the selected colour; supplier photographs show two fastening ties
Frequently asked questions
Where does it fit?
It attaches to a suitable bicycle chainstay near the lower run of the chain. Check that its shape and ties suit your frame without obstructing moving parts.
Which size should I use?
The source uses the size label 222x20x0.3mm, while its diagram marks a 225 mm length. Check your required coverage and clearance against both source references before ordering.
Is the six-colour image a multipack?
The listing is for one protector in the selected colour. Colour comparison images show the available choices.
A pair of expanding end plugs for compatible bicycle handlebars, with aluminium end faces and Black, Red, Blue, Gold, Green or Silver finish options.
Finish the ends of your handlebars
Each supplier option photograph shows two plugs in the selected colour, with a central bolt and an expanding insert. Match the plug assembly to your bar opening and check that there is enough insertion depth.
Check the opening before ordering
The supplier lists a 15–23.5 mm fit range. Check your handlebar's internal opening, available depth and any existing grip or control fittings. No specific bicycle or scooter model fit has been confirmed.
Product specifications
Product
Bicycle handlebar end plugs
Quantity
Two plugs in the selected colour, as shown in the supplier option photos
Supplier-listed metal
Aluminium alloy
Mounting
Central bolt with expanding insert; verify bar opening and insertion depth
Supplier fit range
15–23.5 mm; confirm against your handlebar before fitting
Colours
Black, Red, Blue, Gold, Green or Silver
Frequently asked questions
Does this listing include a pair?
Yes. Each exact supplier colour photo shows two end plugs. Select the colour you require.
Does the colour change the fitting size?
The supplier lists the same fit range for these colour options. Check the actual bar opening and assembly before ordering.
Is a handlebar or grip included?
This listing is for the end-plug pair. Check compatibility with your existing handlebar and grips.
A black rubber dust sleeve for a compatible bicycle V-brake cable assembly. The supplier identifies this option as a 35 mm dust cover.
A replacement dust sleeve
The flexible boot fits over the exposed cable section beside a compatible V-brake guide. Compare its shape and openings with the existing part before ordering. The exact selected supplier photo shows one boot.
Check your brake assembly
Check the sleeve length and openings against your cable, guide and brake assembly. The 35 mm option label alone does not confirm fit for a particular bicycle or scooter.
Product specifications
Product
V-brake cable dust boot
Supplier-listed material
Rubber
Colour
Black
Supplier size option
35 mm dust cover
Quantity shown for this SKU
One dust boot
Fit
Compatible V-brake cable assemblies; check existing part and clearances
Frequently asked questions
Is a metal brake guide or cable included?
The exact selected supplier photo shows the rubber dust boot only. This listing does not include a metal guide, cable or complete brake.
Does the comparison gallery mean a pair is supplied?
The exact selected SKU photograph shows one boot. Other supplier images include multiple views.
Can I fit it to any brake?
Check that your assembly uses this type of V-brake dust sleeve and that its dimensions and openings match the existing part.
A four-piece set of flat spoke clips with patterned reflective faces. These passive reflectors use incoming light and need no battery.
Reflective detailing for compatible spokes
The selected supplier photograph shows four matching clips with notched sides. The supplier lists an ABS body and approximate dimensions of 5.9 × 2.3 cm per clip.
Check spoke fit and wheel clearance
Compare the clip shape with your spokes before ordering. A spoke-diameter range is not supplied for this listing. Check that fitted clips remain secure and clear of the fork, frame, brakes and other moving parts.
Product specifications
Product
Clip-on bicycle spoke reflectors
Quantity
Four pieces
Supplier-listed body material
ABS
Supplier-listed size
Approximately 5.9 × 2.3 cm per clip
Appearance
Grey/silver patterned reflective faces
Power
Passive reflectors; no battery or powered light
Frequently asked questions
How many clips are supplied?
This selected supplier SKU is labelled 4 pieces and its exact photograph shows four clips. This page offers the four-piece option.
Do they light up?
They reflect incoming light. They contain no powered LED light or battery.
Will they fit every wheel?
No universal wheel fit is confirmed. Check spoke shape, attachment and clearance against the clips shown before ordering.
A cycling-style cap with a short brim and lower panels around the ears. Choose Black, Grey or Purple, each supplied as one cap in the supplier's One size option.
Simple outdoor headwear
The supplier lists polyester construction. The exact colour photographs show the cap's brim, shaped crown and extended lower section.
Check the fit
One size is the supplier's option label. A measured head-circumference range is not provided, so a universal fit has not been confirmed.
Product specifications
Product
Cycling-style cap with ear coverage
Supplier-listed material
Polyester
Colours
Black, Grey or Purple
Supplier size
One size; head-circumference range not supplied
Quantity
One cap in the selected colour
Frequently asked questions
Are three caps included?
This listing is for one cap. Select Black, Grey or Purple.
What does One size mean here?
It is the supplier's size label. No measured fitting range is supplied for this product.
What shape is the cap?
The supplier photographs show a short brim, shaped crown and lower panels around the ears.
A black full-head riding cover with an eye opening, extended neck section and shaped front panel, as shown in the exact supplier option photograph.
Coverage for outdoor riding
The supplier lists Lycra fabric, fleece and PVC components. This page offers one black balaclava. Its front panel has the openings and detailing shown in the product photograph.
Check the fit
The supplier describes a one-size design but provides no measured head-circumference or neck-fitting range. Check the shape and eye opening against your requirements before ordering.
Product specifications
Product
Full-face cycling-style balaclava
Colour
Black
Supplier-listed materials
Lycra fabric, fleece and PVC
Shape
Full-head cover with eye opening, front panel and extended neck
Supplier-described sizing
One size; measured fitting range not provided
Quantity
One balaclava
Frequently asked questions
What is supplied?
One black balaclava matching the selected supplier photograph.
Is there a measured size chart?
No product-specific circumference range or measured size chart is supplied for this listing.
Does the front panel have a tested filtration rating?
The source provides no tested filtration or respirator rating. This product is listed as riding headwear.
Shoe covers worn over compatible cycling footwear, with a black body and Green, Grey or Red trim. Choose the supplier's M or L size option.
An extra layer over your cycling shoes
The supplier lists PU construction. The photographs show shaped ankle coverage, textured side sections and an ankle fastening tab. The supplier describes the covers as a pair; each colour photograph illustrates one cover.
Check the size and shoe shape
The supplier's shoe-number guide links M to 41–42 and L to 43–44, but does not name a sizing standard. Compare the shape, sole openings and fastening with your shoes before ordering.
Product specifications
Product
Cycling shoe covers
Supplier-listed material
PU
Colours
Black / Green, Black / Grey or Black / Red
Offered sizes
M or L
Supplier shoe-number guide
M: 41–42; L: 43–44. The source does not specify a sizing standard.
Supplier-described quantity
One pair of shoe covers
Frequently asked questions
Are these complete shoes?
These are covers worn over compatible existing footwear.
How should I use the supplier size guide?
Use its M and L shoe-number references as a guide, then check your shoe shape and the cover openings. The supplier does not name a shoe-sizing standard.
Which colour and size combinations are offered?
This page offers Black / Green, Black / Grey and Black / Red, each in M and L.
Cycling-style socks with a taller cuff and the heel, toe and knit-panel detailing shown in the supplier photographs. Choose Black, Blue, Orange, Pink, White or Yellow in M or L.
Choose your colour and size
The supplier describes the socks as a pair. Each colour photograph illustrates the design of one sock. The fibre composition is not specified by the source.
Check the supplier size labels
M and L are the supplied option labels. No shoe-number ranges or measured foot-length chart are provided for this listing.
Product specifications
Product
Tall-cuff cycling-style socks
Colours
Black, Blue, Orange, Pink, White or Yellow
Supplier sizes
M or L; measured fitting ranges not supplied
Fibre composition
Not specified by the supplier
Supplier-described quantity
One pair in the selected colour and size
Frequently asked questions
Does the six-colour selection mean six pairs are included?
This listing offers one supplier-described pair. Select the colour and size you need.
How do I choose between M and L?
The source supplies M and L labels without a measured fitting chart or shoe-number range. Check the sizing information available before ordering.
Why do the size options use the same colour photograph?
The supplier provides identical design photographs for M and L within each colour. The size selection remains a separate option.
A long, hooded rain garment with a front opening, pockets and the double-brim construction shown in the supplier photographs. Choose an opaque solid colour or a semi-transparent white design with coloured edging.
Choose your style
Solid Black, Solid Pink and Solid Yellow are opaque styles. White / Black Edging, White / Blue Edging, White / Pink Edging and White / Yellow Edging have a semi-transparent white body and contrasting trim.
The supplier illustrates a double zipper on the edged styles, and buttons over a zip on the opaque styles. The photographs also show sleeve hand-cover panels. The material composition and tested waterproof rating are not supplied.
Check size and riding clearance
Use the supplier guide below: XL is listed for heights 150–165 cm, 2XL for 160–175 cm, and 3XL for above 170 cm. These overlapping ranges are supplier guidance, rather than a guaranteed fit. Before riding, check that the garment stays clear of wheels and moving parts and leaves your view, brakes and controls unobstructed.
Product specifications
Product
Long hooded riding rain poncho
Styles
Three opaque solids or four white styles with coloured edging
Sizes
XL, 2XL or 3XL (XXL and XXXL on the source chart)
Construction shown
Hood with double brim, front opening, pockets and sleeve hand-cover panels
Material composition
Not specified by the supplier
Order selection
One garment in the selected style and size
Supplier size guide
The chart labels the applicable height ranges in centimetres. Units are not stated for its other garment measurements.
Frequently asked questions
Is Black Edging an all-black raincoat?
No. The edged styles have a semi-transparent white body. Choose Solid Black for the opaque black style.
How do I compare 2XL and 3XL with the chart?
2XL corresponds to XXL, and 3XL to XXXL. Review the supplier chart and allow room for the clothing you will wear underneath.
What is shown in the product photographs?
The photographs show the selected garment design on a model. The scooter, footwear and other clothing are props.
