Browse electric bikes, electric scooters and accessories currently listed in the Punk Ride catalogue. This broad collection is useful for discovering model styles you might not have considered, from compact scooters to larger bikes and practical riding equipment. Use the category links and product filters to narrow the selection.
Open individual listings for the exact specifications, included items and options. The product photographs represent the listed model, helping you compare designs without relying on generic illustrations. If you already know your preferred brand or vehicle type, the more focused collections may help you reach it faster.
A compact red LED bicycle rear light with twin circular lenses, a top-mounted button and a supplier-described smart brake-sensing function.
Rear light with brake sensing
The supplier describes a smart brake function for this light. The red front cover and paired lenses are shown on a black housing, with the light positioned on the seatpost below the saddle. Follow the supplied instructions to set up and check the brake-sensing response before riding.
Output and battery
The supplier lists an output range of 5–60 lumens, depending on mode, and a built-in 680 mAh lithium battery. Its up-to-30-hour runtime is an estimate that varies with mode, brake-sensor activity, charge level and battery condition; it is not a promise of 30 hours at maximum brightness.
Recharge for the next ride
The listed charging input is 5 V / 0.5 A. Recharge according to the manufacturer's instructions. A charging duration and connector type are not specified in the listing, so check the supplied light before choosing a cable or power source.
Check the seatpost mounting
The product images show a strap around the seatpost holding the light rearward. Check the attachment against your post shape and available clearance, and position it where luggage and clothing will not obscure it. An exact clamp-diameter range is not supplied.
The A red option
This listing has one original option, A red, for one red rear light with its pictured seatpost attachment. The bicycle shown in use is not included. Confirm the light and mount are secure and working before each ride.
USB Rechargeable Bicycle Tail Light for Night Riding
A bright detail for the ride home
A compact, circular USB-rechargeable bicycle tail light with a central power button and a choice of five housing colours.
Rear visibility, simple shape
The round light is shown mounted below the saddle on a bicycle seatpost. Its pale front lens surrounds a black central button, while the coloured outer housing gives you a choice of Black, Red, Blue, Titanium gray or Local gold. These options describe the housing, not different light-output colours.
Recharge between rides
USB charging lets you recharge the light between outings. The supplier lists 20 lumens and up to 9 hours of use; this is an estimate rather than a guaranteed runtime for every setting. Actual duration depends on use, charge level and battery condition. No battery-capacity or charge-time figure is supplied.
Mount where it can be seen
The pictured mounting arrangement uses a bracket and flexible strap around a suitable seatpost. Check strap reach, mounting clearance and the light's rearward visibility on your bicycle before ordering. A supported post-diameter range is not specified.
Housing and weather resistance
The supplier lists PC engineering plastic and an IPX5 water-resistance rating. Keep the charging port protected and do not immerse the light. The supplier's 52 g weight includes packaging, so it is not a bare-light weight.
One selected-colour light
Choose one of the five housing options. The supplier's pack photo shows one light, mounting strap, bracket and USB charging cable. Bicycle and helmet shown in use are not included; the group image illustrates colour choices rather than a five-light pack.
USB Rechargeable Bicycle Tail Light for Night Riding
Put your own shape on the ride
A USB-rechargeable COB bicycle rear light with a compact black housing, orange button and a choice of illuminated shapes or designs.
Choose the design in the option photo
The seven original options are Triangle, love, Circular, The word warning, Jitter, Vibrato and Bone. Their photos show a triangle, heart, plain ring, red-and-blue horizontal bar, musical-note design inside a circle, star design inside a circle and bone shape, respectively. Select the option photo you want; the listing does not say one light switches between all seven designs.
Steady or flashing use
The supplier describes strong-light and flashing operation with a listed output of 10 lumens. Runtime estimates are up to 5 hours in strong-light mode and up to 32 hours in flashing mode. Actual duration varies with the selected mode, charge level and battery condition.
Recharge between outings
The light is USB rechargeable. A built-in battery capacity, charge-time figure and charging-connector type are not supplied in the listing. Follow the supplied charging instructions and check that the light is working before setting off.
Check the mounting space
The photos show a strap fastening the housing around the seatpost, with the illuminated design hanging below it. Leave room for the selected shape and keep it clear of the tyre, saddle bag and clothing. The supplier lists 59.5 × 28.5 × 20 mm without identifying which parts or option the measurement covers; do not treat it as the overall size of every illuminated shape. A supported seatpost-diameter range is not specified.
Housing and pack
The supplier lists PC engineering plastic. This purchase is one light in the selected design with its pictured mounting strap; the bicycle and saddle shown in use are not included. Match the selected option to its photograph before ordering.
A black LED bicycle front light with a rectangular lens, ribbed sides and a round top button, supplied with the pictured strap-style handlebar mount.
Simple front-light layout
The photos show a single front lens and a top control button in a compact black body. The supplier describes a bright LED light but supplies no measured lumen output or verified beam-pattern certification. Aim the light appropriately for the conditions and people around you.
Size and handlebar fitting
The supplier's dimension image labels the light body as 96 mm long, 39 mm wide and 26 mm high; the mounting bracket projects below the body. Check available handlebar space, strap reach and cable clearance before ordering. A supported handlebar-diameter range is not specified.
Power and charging information
The supplier's pack photo shows a USB charging cable with the light. A reliable battery model, capacity, charging time and runtime are not stated. Use the supplied instructions to identify the correct charging and battery requirements; do not choose replacement cells from the source's general troubleshooting wording.
Heat and weather
The body carries a HOT warning in the product photos. Follow the manufacturer's operating instructions and allow the light to cool before handling if warm. The source's general cooling and glare-control claims do not establish an overheating-prevention guarantee or certified glare-free performance. No IP rating is supplied.
One Black light
The single Black option is pictured with one light, one strap-style mounting bracket and one USB cable. Bicycle, rider and illustrative handlebar section are not included. Check that the light and mount are secure and working before riding.
Black cycling shoe covers with ankle-height coverage, a rear zip and reflective details, offered in M, L, XL and XXL.
Details made for fitting over shoes
The product photos show a rear zip, a fastening tab at the ankle and a heel pull loop. Open the cover before fitting it over your cycling shoe, then secure the zip and cuff without forcing the fabric. Large pale side lettering and the supplier-described reflective elements form part of the pictured design.
Choose using the supplier's chart
The supplier's image lists these US / EUR shoe-size ranges: M — US 5.5–8, EUR 38–41; L — US 8–9.5, EUR 41–43; XL — US 9.5–11, EUR 43–45; XXL — US 11–13, EUR 45–47. These are the supplier's chart entries, not a UK conversion. Shoe shape, sole bulk and cleat arrangement can affect fit; check against your actual cycling shoes.
Weather and wear
The supplier describes the covers as waterproof and wear-resistant but supplies no test standard, certified water-resistance rating or temperature range. Fit, openings and riding conditions affect coverage. Reflective details supplement appropriate bicycle lighting.
Check sole and pedal clearance
Before riding, make sure the covers do not obstruct your cleats, pedal engagement or release. The listing does not specify a supported cleat system or sole-opening dimensions; do not assume every cycling shoe and pedal combination is compatible.
One selected-size pair
Choose Black in M, L, XL or XXL. The product photos show a pair of covers; shoes, pedals and bicycle are not included. Follow the supplied fitting and care instructions.
Rock Brothers aluminium-alloy bicycle pedals with open platforms, raised metal contact points and five colour options.
A platform for each foot
The product photos show an L/R pedal pair with cut-out platforms, raised metal contact points and silver threaded spindle ends. The supplier identifies the material as aluminium alloy and describes a sealed construction. A bearing type, count and service interval are not specified.
Choose your platform colour
Select Blue, Green, Red, Silver or Yellow. The option photos show the selected platform colour with black sections and blue central bodies; Silver refers to the silver-and-black platform rather than an entirely silver pedal.
Confirm the crank fit
A verified spindle-thread size is not stated in this listing. Confirm compatibility with your bicycle's crank threads before ordering and follow the manufacturer's fitting instructions, paying attention to the pictured L/R markings. Do not force an incompatible pedal into a crank.
Supplier dimensions
The source prose lists 200 mm in length and 150 mm in width. It provides no dimension diagram identifying the measurement endpoints. These supplier-listed figures do not establish the spindle thread or crank fit; check the exact required measurements before purchase.
Sealed design and included pair
The supplier describes sealing and waterproof performance but provides no IP rating or test certification. Do not treat that wording as an immersion rating. One L/R pedal pair in the selected colour is pictured; the listing does not specify installation tools or additional accessories.
A compact bicycle inner-tube patch kit with a carry case. Keep it with your riding essentials and follow the instructions for the supplied patch system.
Product Features & Details
Choose the Right Fit for Your Ride
Check the fitting requirements and selected option before ordering.
Product Specifications
Product
Bicycle inner-tube repair kit
Format
Portable patch kit with carry case
Supplier-listed dimensions
11.5 × 6 × 2 cm
Listed option
1 set
Intended use
Suitable bicycle inner-tube puncture repairs
Frequently Asked Questions
How should the patches be applied?
Follow the supplied patch instructions, including surface preparation and any adhesive required by that patch system. Do not assume that every pictured patch is glueless.
Is this a tubeless tyre-plug kit?
The supplier describes inner-tube repair. Do not assume the kit contains tubeless plugs or sealant.
Will it repair every puncture?
A patch kit cannot repair every type of damage. Inspect the tube and tyre, follow the supplied instructions and replace damaged components where needed.
A black composite-PU bicycle bag with a clear phone window, zippered storage and strap mounting for the top tube. Green trim and a raised sun hood match the product shown in the photographs.
Product Features & Details
Choose the supplier's 5.8inch or 6.0inch option. These are option labels; check your phone and case dimensions before ordering.
Choose the Right Fit for Your Ride
Check dimensions, fitting requirements and the selected option before ordering.
Product Specifications
Product type
Top-tube bicycle phone bag
Material
Composite PU
Colour
Black with green trim
Mounting
Top-tube strap mounting
Phone compartment
Clear window with raised sun hood
Storage closure
Zippered
Options
5.8inch; 6.0inch
Weather protection
Water-repellent construction
Frequently Asked Questions
Where does this bag mount?
The bag is shown strapped to a bicycle's top tube. Check frame space, cable clearance and the selected option before fitting.
Are the phone and bicycle included?
No. The phone and bicycle shown in the photographs are installation examples. This listing is for the bag in the selected option.
Is the bag waterproof?
The supplier describes the construction as water-repellent. It is not sold with an immersion or IP waterproof rating.
Aluminium-alloy bicycle platform pedals with open cut-outs, raised metal contact points and five finishes to match your ride.
Open platform construction
The photos show a left-and-right pedal pair, silver threaded spindle ends and raised metal contact points around the platform. The supplier identifies the material as aluminium alloy. Choose shoes that sit securely on the platform and check the pedals before riding.
Five platform colours
Select Black, Red, Blue, Silver or Golden. The colour photos show black central bodies on every option, with the selected finish on the surrounding platform. The Silver option has a silver platform and black centre; Golden has a gold-coloured platform and black centre.
Confirm the axle and crank fit
A verified axle-thread size is not supplied in the listing. Confirm the thread and crank compatibility before ordering, and follow the manufacturer's fitting instructions. The pictured L and R markings distinguish the two sides; do not force a mismatched pedal into a crank.
Supplier-listed figures
The source prose lists 50 mm height, 200 mm length, 150 mm width and 0.418 kg. It does not include a measurement diagram or specify the basis for the weight. These are supplier-listed figures, not independently verified platform dimensions or a confirmed weight per pedal.
Sealing and included pair
The supplier describes high-strength sealing and waterproof performance but supplies no tested bearing-seal or waterproof certification. Do not treat the description as an immersion rating. The product photos show one L/R pedal pair in the selected colour; installation tools and additional accessories are not specified.
Give your bicycle a vintage finishing touch with this silver iron bell. Choose the 52 mm or 58 mm option for a traditional mechanical signal with a bright domed appearance.
A familiar mechanical design
The product photos show a rounded silver dome with a patterned centre detail and a thumb lever at the side. Press the lever to operate the bell. It uses a mechanical ringing action and does not need charging or batteries.
Choose your bell size
The exact options are Silver / 52mm and Silver / 58mm. These numbers identify the supplier's bell size choices; they are not handlebar clamp diameters. Select the option that suits the space available around your bicycle's controls.
Check the mounting bracket
Underside photographs show a curved bracket with screw fasteners. An exact supported handlebar-diameter range and tightening torque are not supplied. Measure the intended mounting area and confirm the bracket arrangement is suitable before ordering.
Iron with a silver finish
The existing listing and supplier specify iron construction and a silver finish. The reflective metal surface is shown from several angles. A coating specification, corrosion-resistance rating and measured sound level are not supplied.
Fit, test and ride
Follow the supplied installation guidance, position the lever within comfortable reach and keep the bell clear of brake and gear controls. Confirm it is secure and rings freely before riding. Use an appropriate signal without relying on a guaranteed audible distance.
Your selected option
This listing is for the selected silver bell size. The multi-view product collage illustrates its appearance and underside; it does not establish that several bells are supplied together.
Add a red metallic-look finishing touch to your handlebars with this aluminium-alloy bicycle bell and built-in compass. A thumb lever provides a mechanical ringing action, with no electronic horn controls to manage.
Thumb-operated ringing
The photographs show a black thumb lever beside the round bell body and a clamp beneath it. Position the lever where you can reach it while maintaining control of the bicycle. The supplier describes a crisp ring but does not provide a measured sound level or audible distance.
Built-in compass
The top carries a compass face with direction markings and a pointer. Treat it as an additional accessory: the source provides no accuracy specification or calibration method. Do not rely on this small handlebar compass as your only navigation aid.
Check the handlebar fit
The existing listing and supplier specify an approximately 22 mm handlebar fitting. Measure the actual mounting area and check clearance from grips, brakes, gear controls and cables before ordering. A tightening torque and compatibility with every handlebar are not supplied.
Source dimensions
The supplier lists overall dimensions of 72 mm length × 52 mm width × 65 mm height and a weight of 0.0627 kg. Its top-view photograph separately labels a 47.7 mm span across the round body. That pictured span is not the clamp diameter.
Selected finish
The sole option is As shown. Product photos show a red bell body, black lever and mounting base, and a pale compass face. The bicycle and handlebar in installation photographs are not included.
Before riding
Fit the bell according to its instructions and confirm the mounting is secure, the lever moves freely and the ring works before setting off. Keep your normal lighting and navigation arrangements appropriate for the ride.
Aluminium-alloy bicycle bottle holder with an open cage design. Choose Black, Blue, Golden, Red or Silver.
Product details
Match the holder's mounting arrangement and bottle fit to your bicycle before ordering. Bottle not included; do not assume mounting bolts are supplied.
Support a compatible bicycle with this black folding floor stand, featuring two red chainstay cradles. The aluminium-alloy stand is described for maintenance, parking and display, with a supplier-listed 20–29 inch bicycle range.
Two support cradles
The photos show two upward-facing red cradles with dark contact inserts and black adjustment knobs. The source describes chainstay mounting. Check the contact points against your frame and confirm clearance from the derailleur, brake, cables and wheel before use.
Folding floor-standing design
The stand opens into a broad base and folds for storage or transport. Place it on a firm, level surface and ensure it is stable before supporting a bicycle. It is not described as a tall frame-clamping workstand.
Adjustment and compatibility
The supplier lists three-way micro-adjustment and adjustable height, without specifying a measured adjustment range. The 20–29 inch listing is a bicycle-size guide; wheel size alone does not establish compatibility with your frame or components.
Material, size and weight
The source specifies aluminium alloy, a Black option and dimensions of 42 × 33 × 3 cm, with a listed weight of 0.82 kg. The measurement configuration is not identified, so these figures should not be treated as an opened footprint or a height-adjustment range. The supplier allows manual-measurement variation of ±1–3 cm.
Use within the stated purpose
A maximum bicycle load and rider-support rating are not supplied. Follow the product instructions, check stability and avoid applying force that could dislodge the bicycle. Confirm suitability for your particular maintenance task before beginning.
What's included
One bicycle floor stand is listed. The bicycle and other products shown in the photos are not included. The pictured Black option has red support fittings; display and lighting may affect the apparent colour.
An open-frame bicycle bottle cage with curved retaining arms and a lower support ledge, supplied in the original Kettle holder option.
Open access to your bottle
The pictured cage supports the bottom of the bottle while the curved arms surround its sides, leaving an open front for access. Choose a bottle that sits securely in the cage and can be removed without striking your bicycle frame.
Two mounting arrangements pictured
The product photo shows a slotted mounting spine on the cage and a separate clamp-style adapter, alongside two screws and a hex key. Check your intended fixing points, the adapter shape and available clearance before fitting. A clamp-diameter or bolt-spacing range is not supplied.
Check the dimensions
The supplier lists overall product dimensions of 80 × 80 × 190 mm. These are not a stated bottle-diameter or clamp-opening range. Compare the cage and mounting arrangement with your bicycle and bottle before ordering; the general source description does not establish universal compatibility.
One cage, with pictured fittings
The Kettle holder option is for one bottle cage with the pictured clamp adapter, two screws and hex key. A water bottle and bicycle are not included. The second fitted view illustrates installation rather than an additional cage.
Set up before you ride
Follow the supplied fitting instructions, check that the mount and bottle are secure, and make sure the installation leaves moving parts and controls clear. No maximum bottle weight or tested rough-terrain retention rating is specified.
Bicycle saddle in Spring or Spherical support styles, with Blue, Black or Red option labels. Black-labelled options have yellow-green accents in the supplier photos.
Product details
Choose the support style shown for your option and check compatibility with your seatpost clamp.
A black U-shaped bicycle padlock with two keys and a mounting frame, ready to carry between stops on a compatible bike.
A keyed U-lock for your bicycle
The curved U-shaped shackle closes into the straight lock body. The supplier describes a plum-blossom-style key cylinder, and the supplied keys have the tubular ends shown in the product photos. The selected option is Black with logo.
Carry it with the mounting frame
The included mounting frame holds the lock for transport and is supplied with two screws. Check that the bracket suits your intended mounting point and leaves room for pedalling, cables and steering; a bracket diameter range is not specified.
Check the space you need
The supplier lists an overall size of 18 × 13 cm. This does not specify the clear opening inside the shackle. Check the space required around your bicycle and chosen anchor point before ordering; do not assume every mountain-bike frame or anchor arrangement will fit.
What comes in the pack
One U-shaped bicycle lock body, two keys, one mounting frame and two screws. The listing is for one lock set; the supplier's 60-units-per-carton packaging reference is not the quantity supplied with this purchase.
Security information
An independent security certification or tested resistance rating is not provided in the supplier listing. Choose a suitable fixed anchor and follow the lock's instructions; the cylinder description is not a guarantee against theft.
Finish your cycling kit with black short-finger gloves featuring angular reflective details and a patterned palm. Choose M, L, XL or 2XL using the supplier's measurement chart.
Short-finger shape
The open fingertips leave your fingers exposed for handling controls and small items. Photographs show a flexible black back, grey palm panels and a wrist tab. The existing listing describes Lycra and silicone construction; material percentages are not supplied.
Reflective details
Pale angular elements across the fingers and back of the hand are described as reflective. Their appearance changes with the light falling on them. No measured visibility distance or protective certification is supplied.
Palm details
The palm photograph shows stitched panels, a striped contact area marked GEL, small perforations and finger pull loops. The marking is retained as a pictured detail; the listing does not establish padding thickness or a tested vibration-reduction figure.
Supplier size chart
The chart lists length / cuff circumference / palm width in centimetres: M 14 / 19 / 9.6; L 14.5 / 19.8 / 10; XL 15 / 20.6 / 10.8; 2XL 15.5 / 21.4 / 11.2. These are the supplier's chart headings and figures, not a guarantee of fit.
Choose by measurements
The source warns that its Asian sizing can run 1–2 sizes smaller than European or American sizing and recommends the larger option between sizes. Compare your measurements with the chart rather than relying on your usual label. The chart notes possible manual-measurement variation of 1–2 cm.
Cycling use
Check that the gloves allow full brake and gear-control movement without pinching or slipping. These are short-finger cycling gloves; motorcycle-protection certification is not provided. The selected option is Black in your chosen size.
Add grey reflective sleeves to suitable bicycle spokes with this 12-piece set. Each strip is listed as 8 cm long, with a split tubular shape shown in the product photographs.
A reflective wheel detail
The sleeves reflect light directed towards them. Supplier photos show different spoke arrangements and a bright appearance under illumination; the effect depends on lighting, viewing angle and wheel movement. These are passive reflectors and need no batteries.
Twelve pieces per set
The supplier specifies 12 grey strips. Wheel photographs illustrate possible arrangements and may show more strips than one set supplies. A bicycle, wheel and other accessories are not included in the listed set.
Dimensions and fitting
Each strip is listed as 8 cm long, with an inner-diameter range of 1.9–2.4 mm and an outer diameter of 5 mm. The photos show an opening along the sleeve so it can fit around a suitable spoke. Compare your spoke shape and diameter before ordering.
Check your wheel
The source mentions mountain-bike spokes of around 24 cm as an example; that is not the strip length or a universal wheel specification. Check the available spoke length and clearance from neighbouring spokes, brakes, frame and drivetrain. Do not force a sleeve onto an unsuitable spoke.
Before riding
Follow the fitting guidance and confirm every strip is securely retained. Turn the wheel by hand to check clearance before riding and inspect the sleeves regularly. Use these reflective details alongside the lights and reflectors appropriate for your cycling setup; a measured visibility distance is not supplied.
Bring a traditional look to your bicycle with this complete leather saddle, offered in Black, Coffee and Light Brown. Its broad rear, tapered nose and visible twin rear springs give it a distinctive profile.
A traditional saddle silhouette
The product photos show a shaped top with metal rivets around the edge, small openings along the centre and a pair of coil springs beneath the rear. The covering is described by the supplier as leather/cowhide; a specific leather grade or tanning process is not stated.
Choose your finish
Black gives the saddle a dark finish, Coffee has a deeper brown appearance and Light Brown offers a warmer tan shade. Each option is one complete bicycle saddle in the selected colour. Refer to its option photo when choosing the finish for your bike.
Size and weight
The supplier lists 260 mm length, 220 mm width and 120 mm height, with a stated weight of 1.02 kg. Compare that shape and width with your current saddle and riding position before selecting it. The listed dimensions do not specify the rail spacing or diameter.
Check the mounting interface
The underside photos show saddle rails and spring hardware. Check your seatpost clamp, rail fit and available clearance against the supplied saddle before installation. Universal fit and compatibility with every mountain or road bicycle are not established by the listing.
Set up for your ride
Use the supplied installation and care instructions for the actual saddle and covering. Comfort depends on fit, saddle angle and riding position; the visible springs alone do not establish a tested suspension rating.