Browse electric bikes, electric scooters and accessories currently listed in the Punk Ride catalogue. This broad collection is useful for discovering model styles you might not have considered, from compact scooters to larger bikes and practical riding equipment. Use the category links and product filters to narrow the selection.
Open individual listings for the exact specifications, included items and options. The product photographs represent the listed model, helping you compare designs without relying on generic illustrations. If you already know your preferred brand or vehicle type, the more focused collections may help you reach it faster.
Half-finger design in the exact option shown below.
Key features
Half-finger design
Microfibre palm with padding
Stretch mesh back
Finger pull tab
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Full-finger cycling gloves in the exact option shown below.
Key features
Full-finger cycling gloves
Microfibre material
Palm mesh vents
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Fleece-lined construction in the exact option shown below.
Key features
Fleece-lined construction
Conductive material on thumb and index-finger tips
Silicone palm and finger pattern
Elastic cuffs
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Half-finger design in the exact option shown below.
Key features
Half-finger design
SBR palm padding
Thumb towel-cloth panel
Finger pull tabs
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Handup Most Days Full-Finger Gloves — Flat Floral Medium
Full-finger design in the exact option shown below.
Key features
Full-finger design
Printed fabric back
Silicone printed palms
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Full-finger design in the exact option shown below.
Key features
Full-finger design
Microfibre construction
Padded palm
Thumb terry-cloth panel
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Full-finger construction in the exact option shown below.
Key features
Full-finger construction
Microfibre palm with gel padding
Knitted back and neoprene knuckle sections
Adjustable wrist strap
Thumb terry-cloth panel
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Full-finger design in the exact option shown below.
Key features
Full-finger design
Silicone palm pattern
Ventilation holes
Touchscreen fingertip design
Adjustable wrist closure
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
Half-finger cycling design in the exact option shown below.
Key features
Half-finger cycling design
Palm padding listed by supplier
Fit & use
Check your hand measurements against the supplier's size guidance before ordering. These are cycling or general riding gloves, not verified protective equipment: no crash-protection, impact-certification, medical, waterproof or UV-protection claim is made. Touchscreen operation, where listed, may vary by device; stop before using a phone.
The supplier describes 4.7–6.9 inches as phone width, which needs clarification. Check case dimensions, thickness and clamp fit; damping does not guarantee protection from vibration damage.
CYCEARTH Bike Phone Mount - Aluminium Handlebar Holder
CYCEARTH Aluminium Handlebar Phone Mount
CYCEARTH aluminium phone mount for 55–95 mm wide phones and 25–31.8 mm handlebars, with an adjustable viewing angle.
Key features
Aluminium alloy construction
Adjustable phone clamp
Rotatable viewing angle
Fit and compatibility
This linked version is the handlebar mount, not the separate stem version.
Specifications
Phone width
55–95 mm
Handlebar diameter
25–31.8 mm
Approximate holder dimensions
127 × 85 mm
Mount version
Handlebar
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Ulefone Armor Mount Pro AM02 Handlebar Phone Mount
Ulefone AM02 handlebar phone mount with adjustable clamps and TPU cushions. Check device and handlebar dimensions before ordering.
Key features
Adjustable side clamps
Rotating ball-joint mount
TPU contact cushions
Fit and compatibility
Check phone dimensions including its case and handlebar fit. Lock the knob after fitting.
Specifications
Phone screen diagonal
6.1–7.2 inches
Maximum device length
217.5 mm
Maximum device width
91.8 mm
Maximum device thickness
31 mm
Bare handlebar base diameter
1.26 inches
Adapter rings
0.87 and 1 inch
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Confirm phone dimensions and camera clearance. An included AirTag is not established. This mount is not a supplied GPS tracker or theft-recovery guarantee.
Miracase Bike Phone Mount - One-Touch Handlebar Holder
Miracase One-Touch Handlebar Phone Mount
Miracase handlebar phone mount with one-touch release, silicone contact pads and 360-degree viewing-angle adjustment.
Key features
One-touch release and lock
Silicone contact pads
360-degree viewing-angle adjustment
Fit and compatibility
Screen size alone does not confirm fit. Check case clearance and handlebar mounting dimensions before ordering.
Specifications
Phone screen size
5.8–7.0 inches
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Fucare ABS phone mount with silicone contact pads, for 60–90 mm wide phones and 22–33 mm handlebars.
Key features
ABS body
Silicone contact pads
Open-screen design
Adjustable clamp
Fit and compatibility
Not listed as compatible with Can-Am Spyder. Check dimensions including the phone case.
Specifications
Phone screen size
4.0–7.2 inches
Phone width
60–90 mm
Phone thickness
Less than 15 mm
Handlebar diameter
22–33 mm
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Adjustable phone holder for bicycle or motorcycle use.
Key features
Mount for carrying a smartphone on a bicycle or motorcycle
Fit & use
The supplier does not provide phone-clamp dimensions or handlebar limits. Confirm your phone, case and mounting dimensions before ordering; universal compatibility is not established.
Red phone holder for bicycle and motorcycle mounting.
Key features
Red listed colour
Supplier lists use with smartphones
Fit & use
Confirm the phone and case width and the bicycle mounting interface before ordering. Supplier compatibility text is incomplete, so exact device-fit claims are not made.
BOBILIFE aluminium handlebar phone mount with six claws and rubber contact pads, adjustable for 55–100 mm wide phones.
Key features
Six-claw holder
Rubber contact pads
CNC aluminium alloy body
Portrait or landscape viewing
Fit and compatibility
Check phone dimensions including its case and handlebar fit. Fitting the mount requires the supplied wrench tools.
Specifications
Phone screen size
4–7 inches
Adjustable phone width
55–100 mm
Mount version
Handlebar
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Victoper handlebar phone holder with corner grips, silicone contact pads and adjustable portrait or landscape viewing.
Key features
Corner-grip design
Silicone contact pads
Adjustable portrait or landscape viewing
Handlebar mounting
Fit and compatibility
Check phone case clearance and handlebar mounting dimensions before ordering.
Specifications
Phone screen size
5.5–6.7 inches
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Detachable enclosed phone holder in the rear-view-mirror mounting option.
Key features
Adjustable ball-joint viewing angle
Detachable phone case
Hanging rope supplied
Fit & use
The title and description disagree about phone-size limits. Measure the complete phone and case and confirm the holder's internal dimensions before purchase. Waterproof/IP67 and biometric-compatibility claims have not been independently verified.
Codyofwatar aluminium phone mount with a 15–50 mm mounting clamp and 360-degree ball-head viewing adjustment.
Key features
Aluminium alloy body
Rubber-coated phone contacts
360-degree ball-head adjustment
Fit and compatibility
Check the mounting surface and phone case dimensions before ordering.
Specifications
Clamp range
15–50 mm
Phone width
2.17–3.54 inches
Before ordering
Measure your phone with its case and check the mounting point on your bicycle or scooter. Fit the holder according to the supplied instructions and check it is secure before riding. Stop safely before adjusting or using your phone. Phone and bicycle are not included.
Orange phone holder with adjustable clamp and rotating ball joint.
Key features
Adjustable handlebar clamp
Rotating ball-joint arrangement
Detachable phone holder
Rear locking control
Fit & use
Supplier title and description differ on the minimum screen size. Screen diagonal does not establish physical fit: check phone width, case thickness and handlebar dimensions. Stop before adjusting or using your phone while riding.
Black silicone phone holder with wrap-around mounting strap.
Key features
Stretch silicone phone-retaining bands
Strap mounting design
Rotating viewing adjustment
Fit & use
Supplier title and description state different screen-size ranges. Confirm your phone and case dimensions before ordering. Do not rely on unverified shock-protection or no-drop guarantees; stop before adjusting your phone.
Dotacty MOLLE Water Bottle Holder Tactical Backpack Duty Belt Sport Bottle Pouch Holster Hydro Carrier Nylon Storage Sleeve for Travel Sling Bag Military Assault Pack Walking Hiking Camping Cycling CB