Practical accessories can make day-to-day riding, storage and maintenance easier. Browse items for electric bikes and scooters, including protective gear, tyres, locks, lights and repair tools. Compatibility matters: a tyre, brake part, charger or electrical component should never be chosen on appearance alone.
Use each product page to confirm dimensions, fitting method, material, included components and stock location. For replacement parts, compare the manufacturer’s model and part number where available. If you are unsure whether an accessory fits your bike or scooter, check its manual or ask for help before purchasing. Product photos show the actual listed item; colours and included pieces should be confirmed in the item description.
Silver Cycling Jacket with Removable Sleeves — S–4XL
A silver cycling layer that converts between a long-sleeve jacket and a sleeveless vest. The original supplier photographs show both configurations, a full front zip, a zipped chest pocket and an elasticated hem.
Choose your size
Available size labels are S, M, L, XL, 2XL, 3XL and 4XL. The original size chart is included in the gallery; it gives garment measurements in centimetres and suggested wearer height and weight ranges. Compare the garment measurements with a similar item that fits you, allowing room for your intended layers.
The chart also includes XS as a reference, but XS is not an available option on this page. The photographs illustrate the shared design rather than a separate photograph for each size.
Material and conditions
The supplier describes a lightweight, wind-resistant fabric with a reflective effect. A verified fabric composition, waterproof rating and certified high-visibility or protective-clothing standard are not supplied. Reflective appearance does not guarantee that other road users will see you.
The jacket and vest photographs show the same convertible garment. Bicycle, clothing worn underneath and other demonstration items are not included.
A compact black cable lock with a four-digit combination head and a coiled cable. The supplier describes a steel cable with a PVC outer covering and an alloy lock cylinder.
For helmets and small accessories
The coiled form packs down for carrying and can be opened to pass through a compatible helmet or accessory attachment point. Check the lock-head size and available cable reach against the item you want to secure.
A verified stretched cable length, cable diameter and independent security rating are not supplied. This compact accessory lock has no verified cutting-resistance or certified bicycle-security rating.
Setting and use
Follow the supplied combination-setting instructions, retain your chosen code and test opening and closing before attaching it to an item. A default code is not established by the reference photograph.
The selected option is one Black cable lock. Helmets, bicycles, luggage and other demonstration items are not included.
An auxiliary grip bar with a central clamp for mounting to a compatible scooter stem. Choose Black grips or Red grips; both options have a black bar and clamp. The supplier describes steel and silicone construction.
Check the stem and clearance
The supplier lists a 25–50 mm riser range. Confirm the stem's diameter and shape, clamp contact, cable clearance and the scooter manufacturer's fitting requirements before ordering. A universal fit or compatibility with every M365 version is not established.
Dimensions and fixing details
The Black reference diagram marks a 230 mm bar width, while the written listing gives 28 cm. These conflict, so a single verified overall width for both options is not supplied.
The source photos show the bar, clamp and fixing arrangement. The written fixing count differs from the Black reference image; an exact supplied fastener count and tightening torque are not confirmed.
Intended use
This is an auxiliary grip fixture, not a replacement for the scooter's steering or brake controls. It has no verified passenger-support load rating or child-restraint certification and does not establish that a scooter is suitable for carrying an additional rider.
Scooter and other installation-context items are not included.
A black pneumatic scooter tyre with a grooved road tread and a sidewall marked 10×2–6.1 and TUBELESS. The supplier identifies the selected tyre as HT019; the reference sidewall also shows an HT019-02 marking.
Size reference
The supplier diagram shows approximately 244 mm overall diameter, 50 mm width and a 157 mm centre opening. These are reference dimensions, not a verified bead-seat measurement or a guarantee of fit on a particular scooter.
Check your wheel before ordering
Match the full tyre marking, rim profile, tubeless sealing arrangement and available mudguard and frame clearance. A scooter model name or nominal 10-inch size alone does not confirm compatibility. A direct replacement fit or complete conversion arrangement for M365, Pro or Pro2 scooters has not been verified.
Have the tyre fitted and checked by a suitable technician. Follow the tyre and wheel manufacturer's pressure and load requirements. This is an air-filled tyre and is not puncture-proof.
This listing is for the selected tyre. A wheel, motor, valve and scooter conversion kit are not specified as included.
Multicolour Bicycle Derailleur Pulley — 11T or 13T
A multicolour-finish bicycle rear-derailleur guide wheel, offered in 11-tooth and 13-tooth options. The supplier describes a 7075 aluminium-alloy pulley body.
Choose the tooth count
The 11T and 13T photographs have their tooth counts printed on the centre covers. The supplier diagram shows approximately 41 mm across the 11T wheel and 50 mm across the 13T wheel. These are alternative options, not a two-wheel set.
The electroplated multicolour finish may vary in colour placement from the reference photograph.
Check the complete pulley fit
Match your original tooth count, pulley position, mounting bolt, spacer arrangement and derailleur-cage clearance before ordering. The supplier mentions 4/5/6 mm mounting arrangements, but a complete compatibility list and confirmed spacer contents are not supplied. Universal derailleur compatibility is not established.
The source does not establish a ceramic-bearing option for this listing. No particular bearing grade, friction reduction or shifting-performance improvement is guaranteed. Follow your derailleur manufacturer's installation instructions.
A T25 star-drive wrench with an orange T-shaped handle, a long shaft and a short side driver. It is intended for correctly matched T25 fasteners, including bicycle disc-rotor bolts that specify that drive size.
Match the fastener
Check the screw's specified drive before use. T25 is a six-lobe star drive; it is not the same as a standard hex/Allen drive. This option is the supplier's T-type T25 wrench, not a multi-size tool kit.
Construction and use
The supplier shows a steel shaft and a coated handle with a hanging opening. Its written description and image disagree on the exact steel grade, so no particular alloy grade is confirmed.
This is a manual wrench, not a calibrated torque wrench. Follow the component manufacturer's tightening specification and use a suitable torque tool where required. Bicycle, rotor and other components in the reference images are not included.
USB Bicycle Rear Light — Removable Cross-Lens Module
A black bicycle rear-light housing with a red, cross-divided lens and a detachable light module. The supplier photographs show the module twisting out of its mount to expose an integrated USB charging tab.
Lighting and charging
The supplier describes a brake-sensing brightness response and a rechargeable 160 mAh battery. A verified runtime, brightness output and detection threshold have not been supplied; the light is not a guarantee that other road users will see or respond to you.
Remove the light module as illustrated for charging. Check the charging instructions and connector orientation before connecting it to a suitable USB power source.
Size and mounting
The supplier diagram lists approximately 51 mm across and 58 mm housing height. These measurements describe the light assembly, not a confirmed seatpost clamp range.
Check the mounting arrangement and available clearance on your bicycle before ordering. The supplier lists ABS and PC construction. A verified waterproof or road-lighting approval rating is not supplied.
The selected option is Black, referring to the housing; the lens is red. Bicycle and seatpost shown in the reference images are for installation context.
A bicycle saddle with a long central opening, transverse supports visible inside the channel and a dotted surface pattern. Choose Black Blue, Black Red or Black. Each option is shown using its exact supplier photograph.
Colour options
Black Blue has a bright blue side and nose panel; Black Red has a red panel. The Black option has a black upper with the dotted pattern. These are alternatives on one product page, not a set of three saddles.
Size and fitting
The supplier lists approximately 273 mm length, 170 mm width and 80 mm height, with the size label Average Size. These are supplier-listed overall dimensions, not a verified seatpost or rail specification.
Check your seatpost clamp, rail profile and adjustment clearance before ordering. Rail diameter and spacing are not confirmed, and universal compatibility is not established.
Construction
The supplier describes metal support and a leather-type covering. The exact cover composition, padding specification and support material grade have not been confirmed. Comfort depends on the rider, fit and riding position.
A round, ribbed hub light that fits around a compatible bicycle wheel hub. The supplier describes a plastic housing with 12 LEDs and multiple colour effects. This page is for one hub light; a complete bicycle and a second light are not included.
Choose a control model
Manual switch: supplier model label shown with A13-S packaging.
Smart light shock: supplier model label shown with A13-B packaging.
Smart vibration sensor: supplier model label shown with A13 packaging.
Each model uses its exact supplier photograph. The sensor timing, daylight response and operating sequence have not been separately verified for each model.
Check the hub and wheel clearance
The supplier lists an approximately 8.2 cm outer diameter, 1.6 cm thickness and an installation diameter up to 30 mm. Check the actual hub shape, axle area, spokes and available clearance before ordering. This does not establish compatibility with a hub motor or every bicycle wheel.
The supplier describes rechargeable operation, but a verified battery capacity, charging specification and model-specific runtime are not supplied. No waterproof or road-lighting approval rating is established. Use appropriate front and rear riding lights separately.
Bicycle Headset and Bottom Bracket Press-In Tool — Six Colours
A threaded bicycle maintenance press with a crossbar handle and two stepped press plates. The supplier describes this as a double-bearing press-in tool for headset and bottom bracket installation.
Choose a finish
Black, red, blue, green, orange and purple finishes are offered on this page. Each option is shown using its exact supplier SKU photograph; the purple finish appears pink-purple in the original photo.
Check compatibility before use
The supplier has not supplied verified press-plate diameters, supported bearing standards, thread specifications or a working-width range. Check the press plates and tool clearance against your particular frame and components before ordering. It is not confirmed to fit every headset or bottom bracket.
Use suitable support surfaces and follow the frame and component manufacturer's installation instructions. This is an installation press; removal adapters and a universal bearing-removal function are not specified.
Full-finger riding gloves with a wrist fastening strap, shaped finger panels and a raised knuckle panel. Choose the black design or the white-panel design with black fingers and cuff.
Colour and size
Both designs are offered in the supplier's S, M, L, XL and XXL size labels. The colour photographs show the design shared across those size options; they are not a measurement guide.
No product-specific hand-measurement chart is supplied. Check the intended hand fit before ordering and ensure you can comfortably operate the brakes and handlebar controls.
Construction
The supplier describes leather construction. The exact leather type, lining composition and material of the raised panels are not specified.
No verified impact-protection certification or abrasion rating is supplied. The raised panels do not establish a certified level of protection.
A pair of black full-finger cycling gloves with a plain slip-on cuff, a shaped back panel and a textured palm. The supplier photograph shows the back and palm of the same design.
Material and fit
The supplier describes polyester construction and labels this option Free Size. A product-specific hand-measurement chart has not been supplied, so the label does not establish a particular hand circumference or guarantee that one size fits everyone.
For everyday riding
The supplier lists touchscreen-compatible fingertips. Device response can vary. Check that the gloves allow comfortable movement and control of your brakes and handlebar controls before riding.
Includes one pair of gloves. No verified waterproof rating, temperature rating or impact-protection certification is supplied.
A plastic bicycle chainring cover offered in five supplier model shapes. Choose the model that matches your existing guard and fixing arrangement; each option has its own original supplier-labelled diagram.
G4QA48
G4RB42 1
G4RB44
G4RB48 B
G4XD 48
The model names follow the linked supplier options. They are not a verified promise of chainring tooth-count or bicycle-brand compatibility.
Check the diagram
Compare the complete outline, fixing tabs and the marked reference lines with the guard being replaced. The diagrams label different line measurements for different models; those markings are not presented here as a verified bolt-circle diameter.
The supplier's general written size does not reliably distinguish all five models. A full crankset compatibility list and fitting-hardware specification are not supplied, so confirm the required fit before ordering.
One selected plastic guard is supplied. Crankset, chainring and bicycle are not included; fixing screws are not confirmed as included. Fit according to your component manufacturer's instructions and check clearance from the chain and moving parts.
Silicone Bicycle Crank-End Protectors — Pair, Four Colours
Choose your pair
Silicone covers for the exposed ends of compatible bicycle crank arms. The shaped sleeves have an opening for the pedal axle and wrap around the crank tip as shown in the supplier photos.
Each selected option contains two protectors in one colour: Blue, Green, Red or Black. The matching photograph shows the selected colour pair.
Check your crank shape
Compare the sleeve shape, crank-tip width and pedal-axle opening with your crank arms before ordering. A verified crank-model compatibility list and fitting range are not supplied. Universal crank or electric-bike compatibility is not confirmed.
The supplier's written dimensions are inconsistent with its product diagram, so no unverified overall size is presented here. Confirm the dimensions required for your crank before ordering.
This listing is for one pair of the selected silicone protectors. Crank arms, chainring, pedals and bicycle are not included.
A full-head cycling hood with an eye opening and extended neck coverage. Choose from three supplier styles, each shown in its exact option photograph.
1 Style: black hood with a shaped front panel and two circular vent details.
2 Style: black hood with a mesh front section and one circular vent detail.
3 Style: grey-toned hood with a mesh front section and one circular vent detail.
The numbered labels follow the linked supplier options. They identify different front-panel and fabric appearances, not a pack containing three hoods.
Fit and fabric
The supplier lists Lycra/spandex stretch fabric and describes a one-size design. An exact fibre composition and measured head/neck fitting range are not provided. Compare the eye opening and coverage with your requirements; one size does not establish a fit for every rider.
One selected hood is supplied. This listing is for riding headwear; no tested filtration, respirator or impact-protection rating is supplied. A helmet or other demonstration accessories are not included.
A plastic-and-resin bicycle bottle holder with an open cradle and lever-operated tube clamp. The supplier describes a quick-release design for attaching and removing the holder.
Blue: the supplier's Blue-labelled option has a black body with blue padding, as shown in its exact variant photo.
Red: red body with blue padding.
White: white body with blue padding.
The colour names follow the linked supplier options. Use the matching photograph when choosing; the Blue option is not an entirely blue holder.
Check your bottle and mounting point
The supplier lists external dimensions of approximately 14 × 13.5 × 7.5 cm. A verified clamp-diameter range, bottle-diameter range and maximum carrying weight are not supplied. Compare your tube and bottle with the pictured clamp and cradle before ordering; universal bicycle or electric-bike compatibility is not confirmed.
Allow clearance for cables, controls and steering movement. One selected bottle holder is supplied; bicycle and drink container are not included. No spill-prevention guarantee is supplied.
A flexible bicycle mudguard sheet with slotted fixing points, designed to bend into the illustrated guard shape. The supplier describes thermoplastic-resin construction.
Style 1: dark geometric pattern.
Style 2: black-and-white wolf graphic.
Style 3: multicolour face graphic.
The numbered style labels follow the supplier's exact SKU options. Each option has its matching original supplier variant photograph; all three are designs of the same product family.
Check your mounting points
Compare the sheet shape and fixing-slot positions with your bicycle's mounting points and available wheel clearance. A verified wheel-size, tyre-width or fork-fit range is not supplied. Universal bicycle or electric-bike compatibility is not confirmed.
The supplier's general description includes dimensions for several additional designs that are not all linked here, so those measurements are not presented as verified dimensions for every selected style.
One selected mudguard sheet is supplied. Bicycle not included; the inclusion and number of separate fixing straps are not confirmed. Follow the supplied fitting instructions and keep the guard clear of moving parts.
Bicycle Bottom-Bracket Socket with Retaining Assembly
Check the tool fit
A bicycle bottom-bracket service tool combining a splined socket with a threaded retaining assembly. The supplier illustrates the retaining rod holding the socket in position while a separate wrench turns it.
Compare the socket's spline profile and dimensions, the retaining thread and the required wrench connection with your bottom bracket before ordering. A complete verified compatibility list and retaining-thread specification are not supplied. Universal crankset or bottom-bracket compatibility is not confirmed.
This is a bottom-bracket socket arrangement, not the long-handled external-cup wrench design. Follow your component manufacturer's service instructions and use the correct direction and torque for that component.
Selected set
The selected supplier option is the socket with its retaining assembly shown in the matching product photograph. A separate turning wrench or ratchet, bottom bracket and bicycle are not included. Other comparison tools shown in the supplier's general photos are not part of this listing.
Straight tweezers for handling small loose parts during bicycle maintenance. The supplier's selected option is one straight stainless-steel tweezer tool, shown in its matching diagram.
Use to position or pick up suitable small parts, such as loose bearing balls, where access allows. This is not a press-fit bearing extractor or a complete bicycle repair kit.
One selected straight tweezer tool is supplied. The supplier's general promotional image shows several tip styles, but those additional tools are not included with this option.
Black cycling liner shorts with a short-leg cut, elasticated waistband and perforated mesh panels. The supplier photo displays the red internal pad to show its shape and placement; the supplier describes gel padding.
Available in S, M, L, XL, XXL and 3XL. These are the supplier's size labels. A verified waist/hip measurement chart is not supplied for this listing, so confirm the measurements you require rather than assuming the same fit as another clothing brand.
Construction
The supplier describes stretch mesh fabric. An exact fibre blend, compression rating and tested riding-duration benefit are not supplied. The garment is a padded liner design; the photograph shows the internal pad for reference.
One selected pair of black liner shorts is supplied. The source prose also mentions green, but the current linked options are black only.
Women's Padded Cycling Shorts — M–3XL, Three Stitch Colours
Choose your stitching colour
Women's padded cycling shorts with a black body, shaped waist and contrast seams. The supplier describes a silicone-pad design for cycling.
Black: black body with subdued grey-toned stitching.
Blue: black body with blue stitching.
Pink: black body with pink stitching.
The option names follow the supplier's colour labels; Blue and Pink do not mean an entirely blue or pink garment. Each colour is offered in M, L, XL, XXL and 3XL.
Size guidance
Use the original supplier size-chart image as a reference for the selected size. The chart's measurement units and whether the waist/hip figures are flat-garment or body measurements are not stated. Confirm the measurements you need before ordering; do not assume these labels match another clothing brand.
The supplier's prose omits 3XL and mentions a grey colour, while its actual option list and chart include 3XL and list Black, Blue and Pink. This page follows the current linked options and their matching photos.
One selected pair of shorts is supplied. An exact fabric blend, verified compression rating and guaranteed riding-duration benefit are not supplied.
A black nylon-plastic cup holder with an open-sided cradle and adjustable tube clamp. It provides a separate place for a compatible drink container on a bicycle mounting point.
Supplier size guidance
The supplier diagram shows approximately 15 cm overall height and 8 cm across the holder. Check your bottle or cup shape against the pictured cradle; external holder width is not a guaranteed container-diameter fit.
Check the clamp
The supplier’s text lists mounting tubes from 1.9–4.2 cm, while its diagram lists 1.5–4.2 cm. The minimum fit is therefore unconfirmed. Measure your mounting point and confirm the actual clamp range before ordering. Universal bicycle or electric-bike compatibility is not confirmed.
Allow clearance for steering, controls and cables. No verified carrying-load or spill-prevention guarantee is supplied.
One selected black cup holder is supplied. Bicycle, drink container and measuring tool shown in supplier photos are not included.