Steel Bicycle Wall Hook — Black
Steel Bicycle Wall Hook — Black
Lift the bike. Reclaim the floor.
Store a suitable bicycle vertically with this black steel wall hook. The curved hook supports the wheel in the supplier’s illustrated arrangement, with a sponge covering at the contact area.
A compact wall-mounted shape
The supplier lists 260 × 130 × 70 mm dimensions, also shown in its dimension diagram. Check the hook opening against your wheel and tyre, and leave enough surrounding space to lift the bicycle into position and keep handlebars and pedals clear. No exact tyre-width range is supplied.
Four fixing points for a suitable wall
The backing plate has four mounting holes. Screws and dowels are described as included, but the correct fixings depend on your structural wall and intended load. Have the installation checked where needed; do not assume the supplied hardware suits every wall material.
A qualified 30 kg load claim
The supplier advertises support for up to 30 kg. This does not establish a safe capacity for every installation: the wall, fixings, fitting quality and bicycle’s supported wheel all matter. Stay within the lowest applicable limit and check that your wheel is suitable for this hanging method.
Protect the contact point
The source describes a sponge cover intended to cushion the wheel. Check that it is intact and clean before hanging the bicycle, and ensure the bike is seated securely. Includes the black wall hook with the supplier-described mounting screws and dowels; the illustrated bicycle is not included.