Compare electric bikes, electric scooters and accessories from across the Punk Ride range. This collection brings together a broad selection of products so you can explore different brands and riding styles in one place. Filter by the type of item you need, then check the exact model page for its equipment and options.
For an electric bike, consider frame style, tyre size and storage. For a scooter, compare portability, deck size and the relevant technical details. Accessories should be chosen for the size and compatibility stated on their own listings. Product photographs show the models offered, and delivery is included in the displayed final price.
A pair of black full-finger cycling gloves with a plain slip-on cuff, a shaped back panel and a textured palm. The supplier photograph shows the back and palm of the same design.
Material and fit
The supplier describes polyester construction and labels this option Free Size. A product-specific hand-measurement chart has not been supplied, so the label does not establish a particular hand circumference or guarantee that one size fits everyone.
For everyday riding
The supplier lists touchscreen-compatible fingertips. Device response can vary. Check that the gloves allow comfortable movement and control of your brakes and handlebar controls before riding.
Includes one pair of gloves. No verified waterproof rating, temperature rating or impact-protection certification is supplied.
A plastic bicycle chainring cover offered in five supplier model shapes. Choose the model that matches your existing guard and fixing arrangement; each option has its own original supplier-labelled diagram.
G4QA48
G4RB42 1
G4RB44
G4RB48 B
G4XD 48
The model names follow the linked supplier options. They are not a verified promise of chainring tooth-count or bicycle-brand compatibility.
Check the diagram
Compare the complete outline, fixing tabs and the marked reference lines with the guard being replaced. The diagrams label different line measurements for different models; those markings are not presented here as a verified bolt-circle diameter.
The supplier's general written size does not reliably distinguish all five models. A full crankset compatibility list and fitting-hardware specification are not supplied, so confirm the required fit before ordering.
One selected plastic guard is supplied. Crankset, chainring and bicycle are not included; fixing screws are not confirmed as included. Fit according to your component manufacturer's instructions and check clearance from the chain and moving parts.
Silicone Bicycle Crank-End Protectors — Pair, Four Colours
Choose your pair
Silicone covers for the exposed ends of compatible bicycle crank arms. The shaped sleeves have an opening for the pedal axle and wrap around the crank tip as shown in the supplier photos.
Each selected option contains two protectors in one colour: Blue, Green, Red or Black. The matching photograph shows the selected colour pair.
Check your crank shape
Compare the sleeve shape, crank-tip width and pedal-axle opening with your crank arms before ordering. A verified crank-model compatibility list and fitting range are not supplied. Universal crank or electric-bike compatibility is not confirmed.
The supplier's written dimensions are inconsistent with its product diagram, so no unverified overall size is presented here. Confirm the dimensions required for your crank before ordering.
This listing is for one pair of the selected silicone protectors. Crank arms, chainring, pedals and bicycle are not included.
A round, ribbed hub light that fits around a compatible bicycle wheel hub. The supplier describes a plastic housing with 12 LEDs and multiple colour effects. This page is for one hub light; a complete bicycle and a second light are not included.
Choose a control model
Manual switch: supplier model label shown with A13-S packaging.
Smart light shock: supplier model label shown with A13-B packaging.
Smart vibration sensor: supplier model label shown with A13 packaging.
Each model uses its exact supplier photograph. The sensor timing, daylight response and operating sequence have not been separately verified for each model.
Check the hub and wheel clearance
The supplier lists an approximately 8.2 cm outer diameter, 1.6 cm thickness and an installation diameter up to 30 mm. Check the actual hub shape, axle area, spokes and available clearance before ordering. This does not establish compatibility with a hub motor or every bicycle wheel.
The supplier describes rechargeable operation, but a verified battery capacity, charging specification and model-specific runtime are not supplied. No waterproof or road-lighting approval rating is established. Use appropriate front and rear riding lights separately.
Full-finger riding gloves with a wrist fastening strap, shaped finger panels and a raised knuckle panel. Choose the black design or the white-panel design with black fingers and cuff.
Colour and size
Both designs are offered in the supplier's S, M, L, XL and XXL size labels. The colour photographs show the design shared across those size options; they are not a measurement guide.
No product-specific hand-measurement chart is supplied. Check the intended hand fit before ordering and ensure you can comfortably operate the brakes and handlebar controls.
Construction
The supplier describes leather construction. The exact leather type, lining composition and material of the raised panels are not specified.
No verified impact-protection certification or abrasion rating is supplied. The raised panels do not establish a certified level of protection.
Bicycle Headset and Bottom Bracket Press-In Tool — Six Colours
A threaded bicycle maintenance press with a crossbar handle and two stepped press plates. The supplier describes this as a double-bearing press-in tool for headset and bottom bracket installation.
Choose a finish
Black, red, blue, green, orange and purple finishes are offered on this page. Each option is shown using its exact supplier SKU photograph; the purple finish appears pink-purple in the original photo.
Check compatibility before use
The supplier has not supplied verified press-plate diameters, supported bearing standards, thread specifications or a working-width range. Check the press plates and tool clearance against your particular frame and components before ordering. It is not confirmed to fit every headset or bottom bracket.
Use suitable support surfaces and follow the frame and component manufacturer's installation instructions. This is an installation press; removal adapters and a universal bearing-removal function are not specified.
A bicycle saddle with a long central opening, transverse supports visible inside the channel and a dotted surface pattern. Choose Black Blue, Black Red or Black. Each option is shown using its exact supplier photograph.
Colour options
Black Blue has a bright blue side and nose panel; Black Red has a red panel. The Black option has a black upper with the dotted pattern. These are alternatives on one product page, not a set of three saddles.
Size and fitting
The supplier lists approximately 273 mm length, 170 mm width and 80 mm height, with the size label Average Size. These are supplier-listed overall dimensions, not a verified seatpost or rail specification.
Check your seatpost clamp, rail profile and adjustment clearance before ordering. Rail diameter and spacing are not confirmed, and universal compatibility is not established.
Construction
The supplier describes metal support and a leather-type covering. The exact cover composition, padding specification and support material grade have not been confirmed. Comfort depends on the rider, fit and riding position.
Multicolour Bicycle Derailleur Pulley — 11T or 13T
A multicolour-finish bicycle rear-derailleur guide wheel, offered in 11-tooth and 13-tooth options. The supplier describes a 7075 aluminium-alloy pulley body.
Choose the tooth count
The 11T and 13T photographs have their tooth counts printed on the centre covers. The supplier diagram shows approximately 41 mm across the 11T wheel and 50 mm across the 13T wheel. These are alternative options, not a two-wheel set.
The electroplated multicolour finish may vary in colour placement from the reference photograph.
Check the complete pulley fit
Match your original tooth count, pulley position, mounting bolt, spacer arrangement and derailleur-cage clearance before ordering. The supplier mentions 4/5/6 mm mounting arrangements, but a complete compatibility list and confirmed spacer contents are not supplied. Universal derailleur compatibility is not established.
The source does not establish a ceramic-bearing option for this listing. No particular bearing grade, friction reduction or shifting-performance improvement is guaranteed. Follow your derailleur manufacturer's installation instructions.
USB Bicycle Rear Light — Removable Cross-Lens Module
A black bicycle rear-light housing with a red, cross-divided lens and a detachable light module. The supplier photographs show the module twisting out of its mount to expose an integrated USB charging tab.
Lighting and charging
The supplier describes a brake-sensing brightness response and a rechargeable 160 mAh battery. A verified runtime, brightness output and detection threshold have not been supplied; the light is not a guarantee that other road users will see or respond to you.
Remove the light module as illustrated for charging. Check the charging instructions and connector orientation before connecting it to a suitable USB power source.
Size and mounting
The supplier diagram lists approximately 51 mm across and 58 mm housing height. These measurements describe the light assembly, not a confirmed seatpost clamp range.
Check the mounting arrangement and available clearance on your bicycle before ordering. The supplier lists ABS and PC construction. A verified waterproof or road-lighting approval rating is not supplied.
The selected option is Black, referring to the housing; the lens is red. Bicycle and seatpost shown in the reference images are for installation context.
A T25 star-drive wrench with an orange T-shaped handle, a long shaft and a short side driver. It is intended for correctly matched T25 fasteners, including bicycle disc-rotor bolts that specify that drive size.
Match the fastener
Check the screw's specified drive before use. T25 is a six-lobe star drive; it is not the same as a standard hex/Allen drive. This option is the supplier's T-type T25 wrench, not a multi-size tool kit.
Construction and use
The supplier shows a steel shaft and a coated handle with a hanging opening. Its written description and image disagree on the exact steel grade, so no particular alloy grade is confirmed.
This is a manual wrench, not a calibrated torque wrench. Follow the component manufacturer's tightening specification and use a suitable torque tool where required. Bicycle, rotor and other components in the reference images are not included.
An auxiliary grip bar with a central clamp for mounting to a compatible scooter stem. Choose Black grips or Red grips; both options have a black bar and clamp. The supplier describes steel and silicone construction.
Check the stem and clearance
The supplier lists a 25–50 mm riser range. Confirm the stem's diameter and shape, clamp contact, cable clearance and the scooter manufacturer's fitting requirements before ordering. A universal fit or compatibility with every M365 version is not established.
Dimensions and fixing details
The Black reference diagram marks a 230 mm bar width, while the written listing gives 28 cm. These conflict, so a single verified overall width for both options is not supplied.
The source photos show the bar, clamp and fixing arrangement. The written fixing count differs from the Black reference image; an exact supplied fastener count and tightening torque are not confirmed.
Intended use
This is an auxiliary grip fixture, not a replacement for the scooter's steering or brake controls. It has no verified passenger-support load rating or child-restraint certification and does not establish that a scooter is suitable for carrying an additional rider.
Scooter and other installation-context items are not included.
A black pneumatic scooter tyre with a grooved road tread and a sidewall marked 10×2–6.1 and TUBELESS. The supplier identifies the selected tyre as HT019; the reference sidewall also shows an HT019-02 marking.
Size reference
The supplier diagram shows approximately 244 mm overall diameter, 50 mm width and a 157 mm centre opening. These are reference dimensions, not a verified bead-seat measurement or a guarantee of fit on a particular scooter.
Check your wheel before ordering
Match the full tyre marking, rim profile, tubeless sealing arrangement and available mudguard and frame clearance. A scooter model name or nominal 10-inch size alone does not confirm compatibility. A direct replacement fit or complete conversion arrangement for M365, Pro or Pro2 scooters has not been verified.
Have the tyre fitted and checked by a suitable technician. Follow the tyre and wheel manufacturer's pressure and load requirements. This is an air-filled tyre and is not puncture-proof.
This listing is for the selected tyre. A wheel, motor, valve and scooter conversion kit are not specified as included.
Silver Cycling Jacket with Removable Sleeves — S–4XL
A silver cycling layer that converts between a long-sleeve jacket and a sleeveless vest. The original supplier photographs show both configurations, a full front zip, a zipped chest pocket and an elasticated hem.
Choose your size
Available size labels are S, M, L, XL, 2XL, 3XL and 4XL. The original size chart is included in the gallery; it gives garment measurements in centimetres and suggested wearer height and weight ranges. Compare the garment measurements with a similar item that fits you, allowing room for your intended layers.
The chart also includes XS as a reference, but XS is not an available option on this page. The photographs illustrate the shared design rather than a separate photograph for each size.
Material and conditions
The supplier describes a lightweight, wind-resistant fabric with a reflective effect. A verified fabric composition, waterproof rating and certified high-visibility or protective-clothing standard are not supplied. Reflective appearance does not guarantee that other road users will see you.
The jacket and vest photographs show the same convertible garment. Bicycle, clothing worn underneath and other demonstration items are not included.
A compact black cable lock with a four-digit combination head and a coiled cable. The supplier describes a steel cable with a PVC outer covering and an alloy lock cylinder.
For helmets and small accessories
The coiled form packs down for carrying and can be opened to pass through a compatible helmet or accessory attachment point. Check the lock-head size and available cable reach against the item you want to secure.
A verified stretched cable length, cable diameter and independent security rating are not supplied. This compact accessory lock has no verified cutting-resistance or certified bicycle-security rating.
Setting and use
Follow the supplied combination-setting instructions, retain your chosen code and test opening and closing before attaching it to an item. A default code is not established by the reference photograph.
The selected option is one Black cable lock. Helmets, bicycles, luggage and other demonstration items are not included.
Waist-style cycling tights with a cropped leg, shaped panels, contrast seams and a zipped rear pocket. Choose Black or Grey in the supplier’s M, L, XL, XXL, 3XL, 4XL or 5XL size codes.
Colour options
Both options have black main fabric. Grey refers to the grey rear waist panel and bands behind the lower legs, rather than a fully grey garment. The gallery shows the shared colour design across all seven sizes; the Grey image is a rear view.
Fit and fabric
The supplier describes a synthetic fibre blend and quick-drying fabric. Exact fibre percentages, drying performance and padding specifications have not been verified. A cycling pad is not confirmed for this product.
Sizes are supplier codes. Reliable body-fit measurements are not available: the supplied chart has no stated units and contains an inconsistent entry, so it is not presented as a verified sizing guide. Check your fit requirements before choosing a size.
One pair of cycling tights in the selected colour and size. Other clothing and demonstration items are not included.
A black tubular riding camera in a metal housing, identified as Mini F9 on the supplier packaging. The supplier photos show a compact camera with mounting pieces, a strap and a USB cable.
Recording
The supplier lists a 120° field of view, 1920 × 1080 and 1280 × 720 video modes, a rechargeable lithium battery and vibration feedback for operating status. Claimed recording time is up to two hours per charge; actual runtime and image quality have not been independently tested.
Mounting and storage
The gallery demonstrates handlebar and helmet mounting. Check the mount dimensions and your equipment before fitting: a universal bar diameter or helmet fit is not confirmed. A memory card is not shown as included, and supported card capacity is not verified.
The supplier describes the casing as waterproof, but supplies no verified ingress-protection rating or depth limit. Do not rely on the water or surfing illustrations as an immersion specification.
This listing is for the selected black camera. The supplier photo shows mounting pieces, strap and cable; an exact accessory inventory is not separately confirmed. Bicycle, helmet and other demonstration items are not included. No stabilisation, night-vision, wireless connectivity or continuous incident-recording function is promised.
A detachable bicycle dog lead attachment with a black rigid arm, clamp and elasticated lead. The exact supplier variant photo shows the arm, fastening hardware and lead; a bicycle, seatpost and dog harness are not included.
Black / 43 cm option
The supplier names this option Black / 43 cm. The source does not specify which part that length measures, so it should not be treated as a verified total lead length or distance from the bicycle. The arm is described as metal and the lead as textile webbing.
Check the mounting space
The photo shows a clamp fitted around a round bicycle tube. The supported tube diameter, clamp torque and maximum load are not supplied. Check that the mounting surface and clamp are compatible, with clearance from the rider, wheel, pedals, cables and any battery or rack. Compatibility with a particular e-bike, carbon tube or suspension seatpost is not confirmed.
Use with a suitable separately supplied dog harness. This attachment has no verified dog-weight rating or breakaway specification. Check the fastening and lead condition before each use, and introduce the attachment gradually at walking speed away from traffic.
A standalone black cycle computer identified as BSC100S in the supplier images, with a monochrome data display, two front buttons and a rear twist-style mounting interface. This listing is for one cycle computer.
Ride information
The supplier describes satellite positioning and ride recording. The display illustrations show speed, distance and ride time, plus fields for sensor data. Heart rate, cadence and power readings require suitable external sensors; those sensors are not included in this listing.
Supplier specifications
The supplier lists dimensions of 86.7 × 51 × 14.9 mm, USB Type-C charging, up to 40 hours of battery life and an IPX7 water-resistance rating. These are supplier specifications, rather than independently tested performance guarantees; runtime depends on use.
Supplier graphics refer to the iGPSPORT app. Current phone compatibility, connected services and any account requirements should be checked before purchase. Turn-by-turn navigation, included maps and universal sensor compatibility are not confirmed.
The mounted photo demonstrates positioning on a bicycle. The bicycle is not included. The supplier confirms one computer but does not provide a verified accessory inventory, so a particular bracket or cable bundle is not promised.
Mechanical Bicycle Speedometer — Cable Drive, Black
A cable-driven analogue bicycle speedometer with a black round dial, orange pointer and mechanical distance counter. The supplier photos show the dial and handlebar clamp, flexible drive cable and wheel-drive unit.
Dial and drive
The outer dial is marked in km/h from 0 to 60. An inner RPM scale is also printed on the face; this does not confirm a separate pedal-cadence sensor or an independently measured cadence function. The physical cable connects the wheel-drive unit to the gauge.
Check fit before ordering
The supplier lists 26, 27.5, 28 and 29-inch bicycles, but wheel size alone does not establish compatibility. Axle bore, drive engagement, available fork clearance, handlebar clamp diameter and cable length are not verified. Check these against your bicycle before fitting, especially a hub-motor wheel or an unusual axle arrangement.
The supplier describes an aluminium-alloy construction. Exact material composition, calibration accuracy, water-resistance rating and serviceable replacement parts are not confirmed.
Photos show the gauge, clamp, cable and drive unit for the single Black option. The mounted bicycle and its controls are demonstration items and are not included. No GPS, app connectivity or electronic sensor package is supplied by this listing.
A black steel bicycle wall hanger with a projecting upper shelf, a padded support area and lower accessory hooks. The supplier photo shows the shelf-style bracket, mounting backplate and a small bicycle-storage demonstration.
One wall hanger
The supplier lists one bicycle wall hanger for the Black / Free Size option. The photo includes a small illustration of a wrench and screws, but the number and type of installation fixings are not specified. A bicycle, helmet and other stored accessories are not included.
Check fit and wall suitability
The supplier does not provide overall dimensions, support spacing, a maximum bicycle weight or a tested wall-fixing specification. Free Size is the supplier's option label and does not establish universal fit. Confirm the support arrangement against your bicycle frame and choose fixings suitable for the wall construction before installation.
This is a storage hanger, not a riding accessory or vehicle transport rack. A load rating for an e-bike, cargo bike or other heavy bicycle is not confirmed. Have the installation and intended load checked by a competent installer before storing a bicycle.
Black bicycle horn and alarm with four numbered buttons and a separate wired thumb switch. The supplier describes an ABS housing and a handlebar-mounted fitting.
Product details
Check the fitting and power requirements, and follow the product's operating instructions. This is an audible accessory, not a physical bicycle lock or GPS tracker. Bicycle not included.