Browse electric bikes, electric scooters and accessories currently listed in the Punk Ride catalogue. This broad collection is useful for discovering model styles you might not have considered, from compact scooters to larger bikes and practical riding equipment. Use the category links and product filters to narrow the selection.
Open individual listings for the exact specifications, included items and options. The product photographs represent the listed model, helping you compare designs without relying on generic illustrations. If you already know your preferred brand or vehicle type, the more focused collections may help you reach it faster.
Add a compact rechargeable light to your bicycle with a choice of Red or White. The elongated lens and built-in battery keep the design simple, with USB charging and multiple flashing modes described in the listing.
Slim illuminated shape
The product photographs show a narrow, rounded light with an elongated illuminated section and a circular opening at one end. Its supplier-listed product dimensions are 7 × 2 cm. Those dimensions describe the light, not a mounting diameter.
Choose Red or White
The exact options are Red OPP, USB and White OPP, USB. Select the colour you need; the side-by-side photograph shows the two choices and does not establish that both lights are supplied together.
Recharge and reuse
The existing listing specifies a built-in rechargeable battery charged by USB. Battery capacity, charging time, exact connector type and a verified runtime are not supplied. Check the included instructions before charging; a cable is not confirmed as included.
Flashing modes
The supplier describes multiple flashing modes without an exact count or sequence. A measured light output, visibility distance and road-lighting certification are not supplied.
Check your mounting position
The source describes bicycle seatpost or rear-frame use, but an exact mounting interface and diameter range are not provided. Check the attachment and clearance against your bicycle before ordering. Choose a mounting position suitable for the selected light colour and your local cycling requirements.
Weather and everyday use
The supplier describes weather-resistant construction, without a verified ingress rating. Secure the light so it remains visible and check that it works before each ride. Use it as part of an appropriate cycling-lighting setup.
A black rear bicycle light with a dot-matrix display and a separate wireless handlebar remote. The pictured control has a side lever for left/right signals and buttons for the tail-light and supplier-described laser-line functions.
Arrows and light patterns
The supplier’s display images show straight-ahead, left and right arrows alongside several rear-light patterns. Check operation while stationary before riding and keep the display unobstructed by clothing or bags. The projected parallel-line feature does not create a protected lane or establish a safe passing distance.
Separate batteries for light and remote
The supplier lists a 3.7 V, 650 mAh rechargeable lithium battery in the main light and a CR2032 battery for the remote. It advertises up to ten hours of main-light use and up to three months for the remote; actual life depends on use, mode, charge and conditions. The kit photo shows a USB lead, but a charge time and power-input specification are not supplied.
Check both mounting positions
The supplier kit photo shows the main light, round remote, clamp bracket, two cable ties and USB lead. The fitting diagram shows a rear tube clamp with rubber pads and a separate remote mounting seat. Check fit, fastening and clearance on your own bicycle; exact tube-diameter limits are not provided. Route and secure all fittings clear of controls and moving parts.
An extra signal, with observation still essential
Do not rely on the display instead of required signalling, shoulder checks or suitable bicycle lights and reflectors. No independently verified ingress-protection rating, wireless range or guaranteed visibility is provided. Follow the supplied instructions and check the lighting and signalling requirements where you ride.
Add cushioning over your existing bicycle saddle with this Lycra and memory-foam cover. Blue or Red details sit against a black surface, with a tapered nose and a recessed centre channel shown in the product photos.
Choose the accent, keep the black finish
Blue and Red refer to the coloured details in the two round rear panels shown in the option photos. Both versions have a black cover body. The pictures show the cover off the bicycle and fitted over a saddle; a replacement saddle, seatpost or bicycle is not included.
Cushioning over the saddle you own
The supplier describes Lycra fabric and memory-foam cushioning. The photos show a flexible cover with a shaped centre channel and mesh inset; they do not establish a separate gel filling or a tested pressure-relief effect. Comfort depends on your saddle shape, riding position and personal preference.
Compare the shape before ordering
The supplier lists approximate dimensions of 28 × 4 × 17 cm without assigning the measurement axes. Compare the outline and supplied dimensions with your saddle, including its nose and rear width, and confirm that the cover can sit securely without shifting or covering adjustment hardware. No saddle-by-saddle compatibility list or size range is supplied.
A secure fit comes first
Check the fitted cover before riding and after any adjustment. It should stay in position as you pedal and allow you to control the bicycle normally. The source does not provide a fastening adjustment range, care instructions or a waterproof rating; keep it dry when storing and do not assume all-weather protection.
Add a compact electric horn to your bicycle handlebar in Black, Blue or Red. The rounded body and loop strap keep the design simple, with a button on the housing for operation.
Compact by design
The supplier lists an engineering-plastic housing, dimensions of 4.3 × 4.3 × 7.8 cm and a stated weight of 0.045 kg. The photos show a rounded front and a small button on the body. Choose the colour that suits your bike; each option is listed separately.
Strap onto a suitable handlebar
A flexible loop strap is shown securing the horn around a handlebar. Check that the strap fits your bar and that the horn leaves room for brake levers, shifters and your normal hand position. An exact supported bar-diameter range is not supplied.
Electric sound, simple controls
This is described as an electric horn. The available details do not specify a measured sound level, a selection of tones or a remote control. Follow the supplied operating instructions for the body-mounted button.
Check the battery specification
The supplier photo shows a round button-cell battery inside an opened compartment. The exact cell type, battery quantity and whether batteries are included are not confirmed in the written specification. Check the supplied instructions before fitting or replacing a cell; USB charging is not established.
One colour for your setup
Choose Black for a subdued finish, or Blue or Red for a brighter detail on the handlebar. The images showing all three colours illustrate the range rather than a three-horn bundle. A water-resistance rating is not supplied.
Carry small cycling essentials inside the bicycle triangle with this black PU frame bag. A long side zip, patterned exterior and multiple mounting straps give it a distinctive place beneath the top tube.
Side access and shaped storage
The photographs show a tapered bag with a long side zip and a broad contrasting pale graphic. The black surface has a woven-look pattern; that appearance does not establish carbon-fibre construction. Choose items that fit without forcing the zipper or distorting the bag.
Straps around a suitable frame
The pictured arrangement uses three upper loops and two lower straps to hold the bag within a frame triangle. Check the available attachment positions, cable routing, bottle-cage access and knee clearance. Strap lengths and supported tube diameters are not supplied.
Capacity and source measurements
The supplier lists a nominal capacity of 2 litres and dimensions of 370 mm length, 150 mm width and 60 mm height. Those axis names are the source's wording; a labelled measurement diagram is not supplied. Confirm the bag's orientation and fit in your available frame space rather than treating these figures as usable internal clearance.
Material and listed weight
The existing listing specifies PU material, described by the supplier as PU leather, and the supplier prose lists a weight of 0.235 kg. The photographs show a structured exterior with a zip opening. A load limit is not supplied.
Weather protection
The supplier calls the bag waterproof and shows water on its exterior. No certified ingress rating or immersion test is provided. Close the zip fully and keep moisture-sensitive contents separately protected.
What is included
The selected option is Black. The photographs illustrate storage using a bottle, phone and power bank; those items and the bicycle are not confirmed as included. Check the bag is secure and clear of moving parts before riding.
Bicycle Phone Storage Bag — Reflective Colour Options
Phone on top. Small essentials to either side.
Keep your phone and smaller riding items together with this bicycle storage bag. A clear top pocket sits above two side pouches, with four reflective-style colour options to suit your setup.
A pocket layout you can see
The product photos show a clear window in the zipped top phone pocket and a zipped pouch on each side. This separates the phone area from the side storage. Phones and other display items in the images are not specified as included.
Choose the exact option
Choose Black Green Reflective Style, Black and Blue Reflective Style, Black and Gray Reflective Style, or Black and Red Reflective Style. Green, Blue and Grey photos show contrasting trim on a textured dark body; the Red photo shows a different dark striped finish with red piping. Refer to the selected option’s own photo for its appearance.
Check your phone and case
The supplier lists the bag at 160 mm length, 140 mm width and 70 mm height. Some supplier images carry a 6.2-inch phone label and describe a TPU touch window. A screen diagonal does not confirm device fit: compare your phone and case with the usable pocket dimensions, which are not supplied. Touch response with your device is not independently verified.
Check the mounting arrangement
The photos show two pouches separated by a central gap, with straps visible on the Red option. Compare the selected bag’s attachments with your bicycle, keeping controls, cables and your pedalling path clear. An exact mounting-tube range or universal saddle compatibility is not established.
Reflective-style details and weather claims
The options are described as reflective styles. Supplier images also describe waterproof features and show a rain-cover illustration, but no tested ingress rating or complete accessory inventory is supplied. Confirm the supplied cover and use suitable protection for sensitive items.
Supplier-listed weight
The written supplier description states 0.33 kg. Choose this bag for its phone-and-side-pouch layout, checking the selected colour, phone space and bicycle clearance before ordering.
Add an adjustable mirror to the left side of a compatible bicycle handlebar. This Black Left / Single option provides one glass bicycle mirror with an angular head and an offset arm.
An angular glass mirror
The supplier lists a glass mirror, with the dimension photo marking the head at 120 mm wide and 90 mm high. Its shaped outline and black surround give it a defined profile at the bar end. The supplier states a weight of 0.197 kg.
Set the viewing angle
The supplier’s adjustment image shows a pivoting arm and 360-degree rotation at the mirror head. Set the angle for your riding position and check the view before setting off. The available details do not establish a measured field of view or a vibration-performance rating.
Check the bar-end opening
The photos show an expanding wedge fitting that inserts into a suitable open handlebar end. The listed fitting range is 14.5–19.5 mm at that interface. Check the inside opening, insertion clearance and suitability of your handlebar and grip; the outside handlebar diameter alone does not confirm fit. Follow the supplied fitting instructions.
One left-side mirror
This option is one Black left-side mirror, rather than a left-and-right pair. Check that its position leaves your normal hand movement and controls clear. Use it as an additional view behind you while continuing to check traffic directly when needed.
Refresh your bicycle setup with this hollow-centre saddle, combining a microfiber-leather cover, EVA filling and supplier-listed chrome-molybdenum steel rails. Choose Black or Black Red for the finish that suits your bike.
A shaped top with a long centre opening
The saddle has a broad rear section, a tapered nose and a long opening through the centre. The supplier diagram marks 250 mm overall length, 160 mm width and a 110 mm central opening. Compare the overall shape and width with your current saddle and preferred riding position.
Two finishes, one saddle per option
Black keeps the centre detail dark. Black Red adds a red accent around the inside of the opening while retaining the dark top surface. Each selected option is one complete saddle; photos showing both finishes illustrate the range.
Cover, cushioning and rails
The supplier specifies a microfiber-leather surface over EVA filling, supported by chrome-molybdenum steel rails, and states an approximate weight of 287 g. This is a complete replacement saddle with rails, rather than a cover to fit over an existing seat.
Check fit before installation
Check the saddle rails against your seatpost clamp and follow the supplied installation instructions. Rail diameter, spacing and clamp torque are not specified in the available details. Comfort depends on saddle fit, position and rider preference; the centre opening does not guarantee the same result for every rider.
An ABS bicycle bottle cage with curved retaining arms, an open front and a lower bottle support. Choose Black, Blue, Green, Red or White for a simple colour accent on a compatible frame.
Five colours, one cage
Each selection supplies one bottle cage in the chosen colour. The grouped photograph shows the available finishes rather than a five-cage pack. The bottle and bicycle shown in the installation image are examples and are not included.
Check the frame mounting points
The supplier lists mounting-hole spacing of 55–72 mm. The rear view shows two elongated mounting openings; match these to suitable bottle-cage bosses on your frame and check bottle insertion clearance. Bolt size, tightening torque and included mounting hardware are not specified. This is not evidence of a clamp-on fitting for a frame without bosses.
Match the bottle to the shape
The supplier gives approximate cage dimensions of 137 × 78 × 68 mm. These overall dimensions do not establish an exact bottle-diameter range. Check that your bottle seats on the lower support and is held securely by the arms before riding, while remaining removable without forcing the cage.
ABS construction for everyday storage
The supplier identifies the cage material as ABS. No tested retention force, carrying-load limit or universal bottle compatibility is supplied. Inspect the cage and fasteners periodically, particularly after knocks, and replace a damaged cage before carrying a bottle in it.
Bicycle storage bag in 4.2-inch, 4.8-inch or 5.5-inch supplier-labelled sizes, with solid and striped colour options.
Product details
Check the selected design, mounting fit and phone-and-case clearance. Striped options have a different profile from solid options. Phone and bicycle not included.
A black iron bicycle storage rack for wall mounting. Check the bicycle fit and wall suitability before installation.
Product Features & Details
Choose the Right Fit for Your Ride
Check the fitting requirements and selected option before ordering.
Product Specifications
Material
Iron
Colour
Black
Mounting
Wall-mounted
Size label
One size
Frequently Asked Questions
What is the maximum load?
A verified maximum load is not provided. Do not assume the rack supports a particular bicycle weight.
Will it fit every wheel or tyre?
No universal tyre-width or wheel-size fit is confirmed. Compare the rack with your bicycle before ordering.
Can it be fitted to any wall?
The wall and fixings must be suitable for the load. Follow the supplied installation instructions and seek appropriate installation advice when needed.
Give your bicycle a fresh finishing touch with this steel-rail saddle, available in White, Red or Black. Its shaped upper surface pairs a broad rear platform with a recessed centre channel.
Shape with a centre channel
The photographs show a curved seating surface and a long recessed channel running along the centre. The channel is a groove in the upper surface; it is not presented as an open cut-out. Saddle comfort depends on your anatomy, riding position and setup.
Three colour options
Select White, Red or Black. The White photograph shows a white surface with a silver-grey centre accent; Red is pictured as a dark saddle with a bright red centre stripe, while Black has a dark finish. Order by the selected option name.
Construction and dimensions
The existing listing specifies a plastic base, steel rails and a supplier-described EVO top material. The supplier lists the saddle size as 240 × 135 mm. EVO is retained as the source material label; a more precise composition is not established.
Check the rail interface
The source describes the steel rail fitting as 7 × 7 without clearly stating its units. Confirm the rail dimensions and your seatpost clamp compatibility before ordering. The listing does not establish a universal seatpost fit or an installation torque.
What you are choosing
This listing is for the saddle in your chosen colour. Other bicycle components positioned beside it in the photographs are not confirmed as included. Check the supplied fitting instructions and secure the saddle correctly before riding.
Add a distinctive black electronic horn to your bicycle setup. Its skull-style body connects by wire to a separate button, with four sound modes listed by the supplier.
A separate button for your setup
The supplier’s instruction photo shows the wired button secured with a flexible loop strap. This lets the button sit separately from the horn body on a suitable mounting area. Check that the position leaves your grips, brake levers and shifters clear, and route the wire away from moving parts.
Four supplier-listed sound modes
The written description lists four distinct sounds and claims 120 dB output. No independent sound-pressure measurement or test distance is supplied, so the figure should be treated as a supplier claim. Follow the included operating instructions to select and use the sounds.
A removable mounting base
The instruction photo shows the horn sliding off a clamp-style base after a release is pressed. Check the clamp and available handlebar space before ordering; an exact supported diameter range and installation torque are not stated. The supplier lists a weight of 210 g.
Battery details to check
The underside photo shows a compartment for cylindrical cells. The available written specification does not confirm the exact battery type, inclusion of batteries or operating time. Check the product’s compartment markings and supplied instructions before fitting cells. A rechargeable or USB-powered function is not established.
Move your everyday load onto the rear rack with this nylon-cloth bicycle pannier bag, offered in Black or Yellow with a roll-top opening and buckle closures.
Roll, buckle and carry
The product photographs show a broad roll-top opening, side buckles and a carrying handle. Roll the opening down and secure the buckles before setting off; the handle gives you a handhold when removing the bag from your bicycle.
Rear-rack attachment
The back view shows two upper attachment points and a lower rotating hook on an adjustable track. Compare that arrangement with your rack tubing, support rails and wheel clearance before ordering. A compatible rear rack is required; a rack is not confirmed as included.
Black or Yellow
Choose Black for a dark exterior or Yellow for a yellow front with dark side panels. The selected colour identifies the option being ordered. Photos showing two bags on a bicycle illustrate use and do not establish that a pair is supplied.
Dimensions and material
The source describes nylon cloth and lists a weight of 0.7 kg. Its dimension photograph labels the bag approximately 30 cm high, 28 cm across the front and 14 cm deep. These are pictured exterior measurements, not a verified usable capacity; no litre capacity is supplied.
Weather protection
The supplier describes waterproof fabric, and the images show water on the exterior. A tested waterproof rating for the complete bag is not supplied. Close the roll top securely and protect moisture-sensitive contents separately.
Before your first ride
Check that all attachments engage your rack securely and that the bag clears the tyre, spokes, brakes and your heels throughout normal pedalling. Keep within your bicycle and rack load limits; a maximum load for this bag is not supplied.
Choose Yellow, Red, White, Black or Blue for this electronic bicycle bell. A coloured barrel-shaped housing sits above a dark clamp base, with a switch on top for operation.
Five colour choices
The colour names refer to the outer housing. Each option is one electronic bell in the selected finish; the group photos show the available range. The supplier lists plastic and resin construction and a stated weight of 0.07 kg.
A rotating clamp base
The supplier’s feature photo describes a base that rotates 360 degrees, and the fitted images show the bell clamped around a handlebar. Check the actual clamp opening, available space and control clearance before ordering. The available specification does not establish a supported handlebar-diameter range.
Top-mounted switch
A small switch is shown on top of the housing. Follow the supplied instructions for operation and power setup. Battery type, battery inclusion, runtime and a rechargeable function are not confirmed in the available written details.
Supplier sound claim
A supplier image describes a 90-decibel electronic ringtone. No independent sound-pressure test or measurement distance is supplied, so this remains a supplier claim. Choose the position and use of the bell to suit your bicycle setup and riding environment; a tested weather-resistance rating is not supplied.
A black bicycle mirror with a round head and flexible arm, designed to let you position the rearward view around your riding setup. The supplier lists plexiglass, aluminium and ABS construction.
A flexible arm for positioning
The supplier photos show the arm straight and bent, with the round mirror head above a split clamp. Set the angle while stationary, then check that your arm, clothing or luggage does not block the view. No tested vibration stability or impact-resistance rating is supplied.
Check your mounting space
The supplier lists compatibility with tubes 22–32 mm in diameter. Measure the intended handlebar position and leave room for brake and gear controls, cables and full steering movement. The pictured screw fastening closes the clamp; an exact tightening torque and a left/right fit specification are not provided.
A round mirror with useful reach
The supplier diagram labels the mirror head 8 cm across, the flexible arm section 18.5 cm and the overall straight length 37 cm. The supplier prose lists a weight of 115 g. Use these figures to assess space and viewing position; the images showing several views do not establish a two-mirror pack.
An additional view, with direct checks still needed
Use the mirror as an extra aid and check traffic directly when needed. A verified field-of-view angle, optical magnification and motorcycle road-use approval are not supplied. This listing presents the product as a bicycle accessory; no bicycle or handlebar is included.
Black bicycle frame bag with hook-and-loop fastening and a supplier-labelled 1.5 L option. The supplier describes PU-laminated non-woven fabric.
Product details
Check the bag outline, strap placement and cable clearance on your frame. The supplier describes splash resistance rather than prolonged water exposure. Bicycle, phone and tools are not included.
A folding bicycle repair and parking stand with a black aluminium-alloy frame, red chainstay cradles and adjustment for setting up a compatible bike.
Support for maintenance or display
The paired upper cradles support a suitable bicycle at its chainstays. The supplier describes three-way micro-adjustment and height adjustment; the pictured knobs and pivoting supports let you position the support arrangement. An exact adjustment range is not specified.
Fold away between jobs
The folding frame closes down for storage or transport. Open the stand fully on a firm, level surface before use, check that the bicycle is supported securely, and keep moving drivetrain parts clear of the stand.
Check your bicycle before ordering
The supplier lists a 20–29 inch wheel range. Wheel size alone does not establish compatibility: compare the support points and clearance against your frame, rear wheel, drivetrain, brake and cables. This is a chainstay-support design; do not assume it works like a frame-clamping workstand.
Dimensions, as supplied
The supplier lists 42 × 34 × 3.5 cm without identifying the axes or configuration. Separately, the supplier's diagram labels 42 cm height, a 31.5 cm base span and approximately 15.6 cm between support centres. These diagram labels describe their pictured reference points; the support-centre figure is not a clamp-opening or frame-fit range.
Black option and included stand
The single Black option has red support cradles and black adjustment knobs, as pictured. One bicycle stand is included; the bicycle shown in use is not included. A maximum-load or rider-support rating is not supplied: follow the manufacturer's instructions and do not assume the stand can support a rider.
Add compact storage to your bicycle with this polyester top-tube bag, featuring a supplier-described magnetic closure and quick-release buckle. Choose Blue, Black or Orange to finish your setup.
A flap over your ride essentials
The product photograph shows a shaped bag with a broad top flap and front closure fitting. The supplier specifies a magnetic closure and quick-release buckle. Choose contents that fit comfortably without forcing the flap closed.
Choose your colour
Blue is pictured with a blue-green finish, Orange with a bright orange exterior and Black with a dark grey-black finish. Each option is sold under its exact Blue, Black or Orange name; the three bags pictured illustrate the colour choices.
Size and capacity
The existing listing and supplier specify 23 × 7.5 × 12.5 cm and a nominal capacity of 1.2 L. These exterior dimensions do not establish the usable internal clearance. Compare the full dimensions of your phone, tools or other essentials before ordering.
Top-tube fit
Check the bag and its attachment arrangement against your bicycle's top tube, frame shape and cable routing. Keep steering movement and knee clearance unobstructed. Exact fastening lengths and frame-diameter limits are not supplied, so the listing does not establish fit with every bicycle.
Material and weather
The supplier describes polyester construction and calls the bag waterproof. A verified ingress rating for the complete bag is not supplied. Close it fully and protect moisture-sensitive items separately.
Before setting off
Confirm the bag is securely attached and cannot move into cables, controls or your pedalling path. The listing is for the bag in the selected colour; phones, tools and bicycles are not confirmed as included.