Compare handlebars, grips and stems for different bicycle positions and control layouts. Width, rise, reach and grip shape all affect how the cockpit fits the rider.
Match clamp diameters, steerer fittings and grip length to your current bike. Leave adequate clearance for levers, cables and steering movement. Follow the specified fitting and tightening guidance, and confirm whether end plugs or mounting hardware are included.
An auxiliary grip bar with a central clamp for mounting to a compatible scooter stem. Choose Black grips or Red grips; both options have a black bar and clamp. The supplier describes steel and silicone construction.
Check the stem and clearance
The supplier lists a 25–50 mm riser range. Confirm the stem's diameter and shape, clamp contact, cable clearance and the scooter manufacturer's fitting requirements before ordering. A universal fit or compatibility with every M365 version is not established.
Dimensions and fixing details
The Black reference diagram marks a 230 mm bar width, while the written listing gives 28 cm. These conflict, so a single verified overall width for both options is not supplied.
The source photos show the bar, clamp and fixing arrangement. The written fixing count differs from the Black reference image; an exact supplied fastener count and tightening torque are not confirmed.
Intended use
This is an auxiliary grip fixture, not a replacement for the scooter's steering or brake controls. It has no verified passenger-support load rating or child-restraint certification and does not establish that a scooter is suitable for carrying an additional rider.
Scooter and other installation-context items are not included.
10 cm Single-Clamp Bicycle Handlebar Accessory Extender
Accessory mounting
Add a separate mounting bar for compatible bicycle accessories with this compact aluminium-alloy handlebar extender. The pictured design uses one clamp and a 10 cm crossbar. Choose Blue, Red or Black.
The supplier lists lights, cycle computers and phone holders as intended uses. The extender is a mounting accessory; any device or its separate holder must be compatible and is not included.
Check the clamp fit
The supplier describes use with 30 mm handlebars, but does not give a verified adjustable clamp range. Measure the intended mounting point and confirm the clamp and any required inserts before ordering. Universal handlebar or electric-bike compatibility is not confirmed.
The supplier diagram shows a 100 mm crossbar and approximately 90 mm overall reach. Leave clearance for brake controls, cables and steering movement. A maximum supported accessory weight is not supplied.
Each selected option is one single-clamp extender in the chosen colour. This is not the longer two-clamp design mentioned elsewhere in the supplier’s general description. Bicycle, lights, phone and other demonstration accessories are not included.
A pair of expanding end plugs for compatible bicycle handlebars, with aluminium end faces and Black, Red, Blue, Gold, Green or Silver finish options.
Finish the ends of your handlebars
Each supplier option photograph shows two plugs in the selected colour, with a central bolt and an expanding insert. Match the plug assembly to your bar opening and check that there is enough insertion depth.
Check the opening before ordering
The supplier lists a 15–23.5 mm fit range. Check your handlebar's internal opening, available depth and any existing grip or control fittings. No specific bicycle or scooter model fit has been confirmed.
Product specifications
Product
Bicycle handlebar end plugs
Quantity
Two plugs in the selected colour, as shown in the supplier option photos
Supplier-listed metal
Aluminium alloy
Mounting
Central bolt with expanding insert; verify bar opening and insertion depth
Supplier fit range
15–23.5 mm; confirm against your handlebar before fitting
Colours
Black, Red, Blue, Gold, Green or Silver
Frequently asked questions
Does this listing include a pair?
Yes. Each exact supplier colour photo shows two end plugs. Select the colour you require.
Does the colour change the fitting size?
The supplier lists the same fit range for these colour options. Check the actual bar opening and assembly before ordering.
Is a handlebar or grip included?
This listing is for the end-plug pair. Check compatibility with your existing handlebar and grips.
Adjustable Bicycle Stem — Black, 90 or 110 mm Options
Adjustable Bicycle Stem — Black, 90 or 110 mm Options
Black adjustable-angle aluminium bicycle stem in 90 mm or 110 mm options. The supplier specifies a 31.8 mm handlebar clamp and 28.6 mm steerer fitting.
Check both fitting diameters, available steerer height and cable clearance before ordering. The fitting diagram shows the 90 mm version.
Rotating Bicycle Handlebar Camera Clamp — Three Colours
Product details
An aluminium-alloy bicycle handlebar camera clamp with a rotating upper mount. Choose blue, black or red to suit your setup.
Material: aluminium alloy, as stated by the supplier.
Colours: blue, black and red.
Design: two-bolt handlebar clamp with a rotating camera attachment.
Fit and setup
Compare the clamp and camera attachment shown in the selected colour photo with your handlebar and camera setup before ordering. Tighten the mounting hardware and check clearance before riding. Camera and bicycle are not included.
Questions
What is included? The selected colour of camera clamp, with the mounting screw and hex key shown in its photo.
Is this a bicycle parking stand? This is a handlebar camera mounting accessory, as shown in the photos.
Bicycle Handlebar Camera Mount — Six Fitting Options
Bicycle Handlebar Camera Mount — Six Fitting Options
Fittings for a bicycle action-camera mount. Choose Metal O type, Metal Q type, or a small or large lock catch with or without an E clip.
The selected option identifies the fitting supplied; all six are not supplied together. Match its photographed mounting interface to your handlebar and camera or adapter. Camera and bicycle are not included.
Bicycle Handlebar Grips — TPR Rubber, Five Colours
Colour at the bars. Texture in your hands.
Refresh a compatible handlebar setup with textured TPR-rubber bicycle grips and supplier-listed aluminium components. Choose Black, Blue, Green, Orange or Red to suit your bike.
Textured grip surface
The source photographs show a patterned rubber surface, a locking collar and a bar-end plug. The supplier lists TPR rubber and aluminium; no specific branded model is promised by this listing.
Check the grip section before ordering
The supplier lists an approximate size of 13.8 × 2.9 cm and an inner diameter of 2.22 cm. Compare the handlebar’s grip-section diameter and available straight length, leaving clearance for brake levers and shifters. Twist-shifter compatibility is not confirmed; check its clearance and the grip length for your exact setup.
Fit the collar and bar-end plug as instructed
The supplier’s fitting photographs show the grip sliding onto the bar, followed by securing the locking ring and fitting the end plug. Follow the actual fitting instructions and your handlebar manufacturer’s limits. No tightening torque or fitting-tool inclusion is specified by the supplier. Check that neither grip rotates before riding.
Keep the chosen colour matched to your order
The five selectable colours are Black, Blue, Green, Orange and Red. The bicycles, handlebars and controls used in the supplier’s fitting photographs are for illustration and are not included.
Pink Children's Scooter and Bicycle Handlebar Grips — Pair
Pink Children's Scooter and Bicycle Handlebar Grips — Pair
Soft TPR grips. Widened end section. Striped grip surface.
Key features
Soft TPR grips
Widened end section
Striped grip surface
Fit and use
Measure handlebar diameter and grip length before ordering. Adult installation required; check grips are secure before use. No toxic-substance-free certification or impact-protection guarantee without documentation.
Specifications
Inner diameter
22.2 mm
Length
110 mm
Pack
Pair
Colour
Pink
Before ordering
Confirm the selected option, dimensions, compatibility and included components before ordering. Follow supplied instructions for fitting and use.
Six exact colour options: camo black/blue, black/red, black/white, black/purple, plain blue, plain black
Specifications
Available options
Camo Black Blue / 15x8x5; Camouflage Black And Red / 15x8x5; Camouflage Black And White / 15x8x5; Camouflage Black Purple / 15x8x5; Pure Blue / 15x8x5; Solid Color Black / 15x8x5
Compatibility & use
Check handlebar diameter and grip clearance before fitting. The supplier option label 15x8x5 is not an installed-size specification.
Black Walnut bicycle handlebar grips, with supplier-stated fit for standard straight 7/8-inch handlebars.
Check the grip area
Confirm the bar diameter and available straight length, including clearance around shifters and brake levers, before ordering.
Installation
Fit securely according to supplied instructions and check that the grips do not twist before riding. The current copy does not establish the grip length or construction material.
Bike Stem 31.8mm / 35mm – 50mm MTB Handlebar Stem for Road & BMX
A compact stem. A precise fit.
The UPANBIKE 50mm bicycle stem pairs a compact profile with a four-bolt handlebar clamp. This Black*50mm option is intended for compatible handlebar and steerer dimensions; check both interfaces before fitting.
The measurements that matter
The supplier specifies a 50mm length measured centre-to-centre between the two clamp holes, a 28.6mm (1-1/8 inch) fork steerer diameter, and compatibility with 31.8mm or 35mm handlebar clamp diameters. Match the correct clamp arrangement to your handlebar.
Four-bolt handlebar clamp
The removable faceplate uses four bolts to hold a compatible handlebar. The product photos show the black UPANBIKE stem with a red insert at the handlebar opening. Use the correct fitting configuration and the supplied installation guidance.
Check the whole cockpit
For mountain bikes, road bikes, BMX and fixie builds, compatibility depends on the actual clamp diameters, steerer arrangement and available space. Confirm cable clearance and handlebar position throughout steering before riding.
Fit with care
Follow the stem, handlebar and fork manufacturers’ installation instructions and tightening requirements. Have a qualified bicycle mechanic fit the stem if you are unsure. Check that the steering and handlebar are secure before use.